I built my SBR for just under 1500.00 and it has everything I need on it.
Printable View
Just to clarify, my intentions for this rifle is to shoot steel at my house. I have to run it suppressed all the time because my house is on the boundry line of a town where you can't shoot. Every time I shoot, someone calls the police and they come out and realize it is not their jurisdiction. I want to have this rifle to run unsuppressed because if I'm at a class, a high round count with an attached suppressor is going too dirty the gun up quickly.
You can't go wrong with a BCM 11.5" build in my opinion. I haven't cleaned my SBR (we have been out shooting 3 times in the last 45 days or so.) and it is still running good. I used this upper.
http://www.bravocompanyusa.com/BCM-B...g-11%20bfh.htm
Robb at Virginia Arms cut the front sight base down so the rail would cover it.
I used a BCM BCG and initially had a BCM handle on it. I swapped over to the new updated PRI latch. You can see a current picture of it in the thread about 10.5/10.3 Inch Barrels here in the NFA section.
IG what can are you using?
Would you mind taking a measurement for me? I'm looking for the distance from the top, front edge of the upper receiver, where the gas tube comes out, to the back side of the suppressor when mounted.