-
That doesn't make much sense...I'm assuming you mean take the "length added after the flash hider" and add it to the "length of the flash hider past the bare muzzle"...??
Either way, I would be making a guess based off of an assumption that I know where the bare muzzle is in relation to the rear-most part of the flash hider, AND how deep the SPR/M4 sits over the flash hider....
I know neither of which, because I am not familiar with the SPR/M4 attachment system/depth/ect...which is why I asked Jason, who helped clear up length added numbers of other cans in a different thread...
-
Which shop did you go to? I want to get a 7.62 AAC can but I'd like to avoid a shop that doesn't know what they're talking about.
-
Deus, I didn't understand your post at first, but after looking at the flash hider's numbers and comparing them to the suppressor's numbers, my rough estimate is 6.125" length added to bare muzzle...and I think you need a minimum of 2.5" barrel behind the muzzle to attach the flash hider
-
Gentlemen, take it easy!
Actually, our "length added" numbers can be confusing, I have been pushing to get them all one standard.
A. Some are "length added from the muzzle".
B. Some are "length added past a standard A2 hider".
C. Some are "Length added past the BLACKOUT Flash Hider mount".
Ironman, you're right- the SPR/M4 web measurement falls into category B.
Measured from a bare muzzle, it adds 6.125" when mounted. The mount requires at least 2.5" of bare barrel, as measured from the muzzle back.
-
Haha I wasn't trying to jump down anyone's throat....Thanks Jason! Your help and participation on the forum is one of the many reasons why I will buy from AAC :D