Barrel Nut torque with Viking Tactics Extreme BattleRail
I installed a Viking Tactics 13" Extreme BattleRail this weekend. The directions say to torque the nut between 30 and 60 ft-lbs. The notch for my gas tube lined up just after 30 (maybe 31 or 32) but with this particular setup after you slide the rail on you turn the whole assemble back to the left an 1/8 turn or so, which makes it feel loose.
Everything seems tight after the set screws were tightened on the rail but I was just curious if this is normal/safe?
Jeremy45