Glock Gen4 22 question

[G4PI09]

I am looking for some feedback on recent production gen4 22's, I have tried searching the site but it was pretty dated information. Do the 22's have the same issues that the 17's and 19's have in regards to extraction and mlafunctions? Any info is appreciated

[M4arc]

No.It appears that the changes Glock made to the Gen4s was geared towards the 40 S&W models. My Gen4 G22 has a little over 1000 rounds through it now without a single malfunction.

At first it would eject brass in every direction but Robb installed the new "unmarked" ejector in it and not its perfect ejection at the 4 o'clock position.

Not only does it run like a top but there is very little recoil (more of push) so it shoots flat and is laser accurate. This is by far the most accurate Glock I own...and I own a bunch!

The Gen4 G22 is quickly becoming my favorite Glock. I'm planning on picking up a Gen4 G23 for concealed carry.

[packinaglock]

No malfunctions of any kind with my gen 4 G27 or 23. I think the .40's have been GTG from the start.

[G4PI09]

thanks guys, i appreciate the info, M4arc, is the unmarked ejector that is installed in your 22 the standard ejector on the current production 22's?

[M4arc]

thanks guys, i appreciate the info, M4arc, is the unmarked ejector that is installed in your 22 the standard ejector on the current production 22's?

I don't know for sure but Robb said it was the most recent. It never malfunctioned with the old ejector but it did spit brass every where. Now it's good to go.

[VIP3R 237]

My gen4 23 purchased in november last year will occasionaly ricochet brass off my glasses or forehead. I am currently waiting for my armorer to get the new ejector in for my gun. Besides the erratic ejection it has been flawless in functionality.

[G4PI09]

M4arc. im guessing the old ejectors that came in the gen4 22's were the 336, so as long as the ejector is not marked 336 im assuming it is the most recent one and therfore good to go.

Viper that sucks i had a early 2011 gen 3 19 and gen 3 17 that would throw brass back in my face frequently which i why i sold them.

[Heavy Metal]

336 is the 9mm Gen 3 Ejector Part number. The .40's have a different Ejector.

[M4arc]

M4arc. im guessing the old ejectors that came in the gen4 22's were the 336, so as long as the ejector is not marked 336 im assuming it is the most recent one and therfore good to go.

Viper that sucks i had a early 2011 gen 3 19 and gen 3 17 that would throw brass back in my face frequently which i why i sold them.

I think the 336 ejector is for the 9mm models. I don't know what mine had in it when I bought because Robb swapped it out at the shop and installed my old one in his gun until they received more ejectors from Glock. I didn't pay attention to what was in there initially but I'll ask Robb to weight in so you know what to look for.

[G4PI09]

Yea i think you guys are right on the ejector not being a 336. M4arc, if you could get Robb to weigh in that would be much appreciated. Thank you