N-Frame grips

[rjacobs]

Finally shot my 1976 44mag N frame yesterday. Its got the target grips on it. Holy hell it beat my hands up, right in the web and then the cylinder release beat up my thumb a little. That was with some decently powerful 240g factory loads.

Anybody got any suggestions for grips that may be a little slimmer(I have fairly small hands) so I can get a little better grip on the gun. And if not slimmer maybe something a bit more comfortable.

Maybe the Hogue or Pachmayr.

Not opposed to wood grips, maybe some Spegel's.

Anybody have thoughts.

Maybe I just need to focus on loading up some cowboy loads for it with some trailboss.

Maybe I just need to stop being a pussy.

[TiroFijo]

If you have small hands the Hogue monogrips will probably fit you fine, and if you choose rubber absorb some of the recoil. Grip your gun with the thumb a little lower, I'm used to a very high grip on my pistols and have to change my grip a little with the 629.

The S&W target grips are too large for most people.

Try reloading some mid range loads, like 240 gr lead bullets around 1000 fps with lower doses of faster powders like unique, makes a world of difference for long training sessions.

[tdb59]

Craig Spegel makes some very nice grips.
When I ran a model 29 a hundred years ago, I used Pachmayr ' small ' size presentation grips. Now all that is produced is the 'large', so you will need to search auction sites, gun shows, etc.

Inside the grip is marked N SMALL.

BTW- the Gripper models suck on a 29.

[Hizzie]

N-frames just don't fit me. My hands aren't big enough. That said my favorite K/L-frame grip is the Miculek by Hogue. Oddly comfortable. Try breaking the lower edges on the cylinder release with a file to keep it from cutting you. You could also replace the flat latch with a newer teardrop style.

You could also try the reinforced grip. Try taking your support hand thumb and wrapping it OVER your firing hand. Obviously this is a revolver specific grip.

Nothing wrong with cast bullets and TrailBoss.

[Deputy Dan]

Smith also made N Frame Magna grips that are great if you can't get your hands around the target stocks.

I have regular magnas on a Highway Patrolman and PC Magnas on a Model 58 and a 520.

[M4Fundi]

Here are the Spegels. I do not believe he makes them in anything other than checkered and it is razor sharp. Too sharp and the grips are too small for the Bear Loads I use. I would love them on a J or K frame. They are beautiful tho



Comparison of the Spegels next to the Hogues. If I was carrying in very cold winter weather and wearing heavy gloves the Hogues are the way to go. Very narrow and grippy as hell with finger grooves. Bare handed they are too narrow and concentrate all the recoil to a very narrow area of the hand (for me)


Kim Ahrends grips are about as perfect as anything I have found. No checkering. Finger grooves which I prefer on the big bore magnums and medium size grips that are wider and more hand filling and MUCH better distribution of recoil in the hand! These grips are game changers for me. The only thing that needs changing on them is you really should soften the corners of the thumb swells to more round and then if you send them back to Ahrends they will respray them for you and look like new. The wood is beautiful also!


IMHO

[cbr]

I have a set of Ahrends combat grips on my 629 and love them. Much thinner than the factory grips. You might check them out.

[Ranger325]

A few years back I invested in a pair of Keith Brown Ropers and I love them! They have the coke bottle shape and are checkered with the traditional Roper 'ribbon' style. I use them on my 4" 29-2 and 5" 27-2. They are great to shoot and are absolutely beautiful. Here is his website: http://www.keithbrowngrips.com/



You may also want to try the S&W for additional ideas. Good luck in your search..........

[okie john]

I have a Model 29-2 like yours, and I’ve literally felt your pain. Remember that when the N-frame came out in 1908, a 250-grain slug at 950 fps was the hottest handgun load going. It’s just not designed for real recoil, no matter what grips you use. Also, factory target grips are among the worst for handling recoil—even Elmer Keith didn’t use them.

There’s a lot of good advice here, but your hand shape matters more than anything. Your mileage will definitely vary, so try before you buy if you can. I’ve learned that Hogues hurt my hand, Pachmayrs reduce recoil somewhat but they’re ugly, and Ahrends are gorgeous but seem to make recoil worse. After dropping loads of cash on nice grips, I ended up back with factory Magnas with either a Pachmayr grip adapter or a Tyler T-grip.

You’re definitely wise to consider lighter loads. I can get away with using factory Magnas because I never shoot full-power ammo in my Model 29-2. This reduces recoil and it makes the gun last longer. Most dyed-in-the-wool Smith guys treat the 29-2 like a 44 Special that can shoot magnum loads in a pinch. They save the hot stuff for Endurance Package guns or they get a Ruger and load it to the gills. A good 250-grain SWC over 8-10 grains of Unique (~1,000 fps) is mild, accurate, and deadly. I’ve killed everything from bullfrogs to deer with it.

A few other things: factory target grips are easy to damage, so replace yours with something more functional before you chip them. Then if you need to sell the gun, you can sell it with new-ish grips, which can add as much as $100 to its value.

The 70’s vintage cylinder release is as much of a drag as factory target grips when it comes to recoil issues. But rather than deburring your original one, which can also affect the gun’s value, I’d replace it with the newer version from Smith or Brownell’s.

Other than that, enjoy your Model 29-2. Whack a deer with it. They’re among the most accurate factory handguns I’ve ever owned.

Let me know if you have questions.


Okie John

[blake g]

Here are the Spegels. I do not believe he makes them in anything other than checkered and it is razor sharp. Too sharp and the grips are too small for the Bear Loads I use. I would love them on a J or K frame. They are beautiful tho



Comparison of the Spegels next to the Hogues. If I was carrying in very cold winter weather and wearing heavy gloves the Hogues are the way to go. Very narrow and grippy as hell with finger grooves. Bare handed they are too narrow and concentrate all the recoil to a very narrow area of the hand (for me)


Kim Ahrends grips are about as perfect as anything I have found. No checkering. Finger grooves which I prefer on the big bore magnums and medium size grips that are wider and more hand filling and MUCH better distribution of recoil in the hand! These grips are game changers for me. The only thing that needs changing on them is you really should soften the corners of the thumb swells to more round and then if you send them back to Ahrends they will respray them for you and look like new. The wood is beautiful also!


IMHO

Ahrends makes some really nice grips, they changed the game for me too with the Mountain Gun.

Those are some ass-kicking boots!!!!