Page 4 of 4 FirstFirst ... 234
Results 31 to 33 of 33

Thread: Syrac Ordnance gas block pinning

  1. #31
    Join Date
    Sep 2006
    Location
    Eastern PA
    Posts
    696
    Feedback Score
    3 (100%)
    I'm not sure when the block was produced as I bought it from Brownells.

  2. #32
    Join Date
    Mar 2011
    Location
    Southeast Louisiana
    Posts
    17
    Feedback Score
    5 (100%)
    I also installed a Syrac and wanted to dimple my barrel. I made a drill guide out of a roll pin. I threaded it and installed it into the block. I left the other screw in so nothing could shift. I used a nylon spacer on my drill bit for depth control. Rocksett just for insurance. Ignore the Noveske block....it's the block I replaced.
    Last edited by paddle007; 05-01-13 at 21:01.

  3. #33
    Join Date
    Apr 2010
    Location
    Philadelphia, PA
    Posts
    402
    Feedback Score
    84 (100%)
    Quote Originally Posted by paddle007 View Post
    I also installed a Syrac and wanted to dimple my barrel. I made a drill guide out of a roll pin. I threaded it and installed it into the block. I left the other screw in so nothing could shift. I used a nylon spacer on my drill bit for depth control. Rocksett just for insurance. Ignore the Noveske block....It used for a prop.
    That's a good, simple idea with the roll pin. I like it.
    Last edited by bleaman225; 05-01-13 at 19:30. Reason: removed his picture from the quote

Page 4 of 4 FirstFirst ... 234

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •