|
||||||||||||||||||||||||||||||||||||||
I don't know what the different colors of JP springs mean. Some will reduce the hammer spring tension to reduce pull weight but it means hammer speed and impact on the primer is reduced.
KNS pins are softer than standard pins and I think their diameter is a tick off
From what I understand, slow motion video shows the Spikes buffer doesn't eliminate carrier bounce as well as a standard buffer does.Spikes ST-T2 buffer
To me, the rest of the rifle looks good. I don't use a BAD lever. In my opinion, the lever doesn't look strong enough to resist damage if the rifle were dropped or roughly handled.
Personally, I don't like the VFG or AFG. They feel awkward to me.
I'd experiment with the sling attachment locations for better comfort when it's slung across your body. Try attaching the font part to the left side of the handguard and the rear to the left side and see if that works better for you
Last edited by MistWolf; 07-11-13 at 02:29.
INSIDE PLAN OF BOX
- ROAD-RUNNER LIFTS GLASS OF WATER- PULLING UP MATCH
- MATCH SCRATCHES ON MATCH-BOX
- MATCH LIGHTS FUSE TO TNT
- BOOM!
- HA-HA!!
-WILE E. COYOTE, AUTHOR OF "EVERYTHING I NEEDED TO KNOW IN LIFE, I LEARNED FROM GOLDBERG & MURPHY"
I am American
https://www.youtube.com/watch?v=575Q...e_gdata_player
There's more than one buffer in there minutely causing bolt bounce as far as I can see.
The OP asked us to critique his build. M4C holds a higher standard than sup-par parts. It would be a disservice to him to recommend anything other than a real buffer.
I'm going to have to agree on the different colored FCG springs. If either are designed to reduce pull weight it can sacrifice reliability.
If a good trigger pull is what you are after a ALG QMS is the best mil spec trigger for the money at $45. Great pull, no grit.
I would also consider ditching the Troy and running a VCAS.
That's what I hear. I have seen the bolt bounce video also. Remember that was taken with one setup used in the same weapon. It's an excellent video BTW. My gas system and spring is set up differently. I can imagine if you fool with the carrier type, spring, gas system, etc. you can get bolt bounce with any weight buffer.
My point is that if the ST-T2 works, why spend the money for another buffer. Spend it on something else.
I'd take the "Infidel" thing off. All that stuff, along with punisher logos and such wouldn't look so good it court God forbid you have to use that to defend your life.
Thanks for all the replies. I'll look into a new buffer for sure. H would be the best option correct? I have a standard carbine buffer in the box now I can replace it with. The EZ pull pins and sling will probably go as well.
Bookmarks