Larue SPR LT104 or Bobro 30mm mount

[jerhelo]

Pretty much so.


C4

The slightly forward I am assuming you are referring to as being closest to Larue LT104???

[C4IGrant]

The slightly forward I am assuming you are referring to as being closest to Larue LT104???

Yes.

C4

[ra2bach]

Is the slightly forward, standard or extended the same as the larue placement, I am mounting a Nightforce 2.5-10x32???

I have used the slightly forward with a SS1-4, SS1-6, and Vortex 2.5-10x32 and it works well for all of these. however, the ring spacing is a little closer on the Bobro so I have switched to an ADM Recon (not the Recon-X) for the 2.5-10 for better support on the longer scope.

this scope is not going to be removed and remounted unless it's broken so it makes no difference to me and the ADM is my second choice anyway...

[horseman234]

Here is a picture of a NF 2.5-10x24 on a SCAR 17 with the Bobro mount. ETA: this is the extended mount

http://s1326.photobucket.com/user/ri...tml?sort=3&o=1

[TurretGunner]

I have used the slightly forward with a SS1-4, SS1-6, and Vortex 2.5-10x32 and it works well for all of these. however, the ring spacing is a little closer on the Bobro so I have switched to an ADM Recon (not the Recon-X) for the 2.5-10 for better support on the longer scope.

this scope is not going to be removed and remounted unless it's broken so it makes no difference to me and the ADM is my second choice anyway...

Then use a 1 piece. It will be cheaper, lighter and all things being equal, less prone to shift/drifting over time.

Unless you absolutley have to have QD, don't.