Results 1 to 2 of 2

Thread: ENVIS M-703E 64-72LPMM Gen 3 Night Vision Monocular $1300 Shipped

  1. #1
    Join Date
    Dec 2010
    Posts
    1,422
    Feedback Score
    1 (100%)

    ENVIS M-703E 64-72LPMM Gen 3 Night Vision Monocular $1300 Shipped

    SOLD PENDING FUNDS




    The NVEC ENVIS M-703E (Evader's Night Vision Imaging System) is a lightweight, Generation 3, head mountable night vision monocular designed for aircrew for escape and evasion use. It uses a U.S. Generation 3, Omni 5, ITT/Exelis F9800N thin film(MX-10160), 64-72 LPMM Resolution image intensifier tube and features a built in Infra-Red illuminator.

    The image is incredibly bright and clear with no blemishes. Includes a standard MILSPEC objective lens and threaded base as found on the PVS-14 so it will accept all standard accessories including 3X lens, compass, weapons mounts, head mounts, etc. This is a MILSPEC unit with the performance of an AN/PVS-14 Delta but without the heavy price tag.

    The ENVIS battery compartment covers are secured by a screw that threads into a spring housed within the body. Because this spring nut doesn’t have a definite stop point it routinely gets over tightened and chips the narrow plastic wall between the two battery compartments. If you have an ENVIS it is either damaged in this area or will be within a short amount of time. The battery compartment on this unit had a very small chip in this area. It has been professionally and permanently repaired and reinforced using anodized aluminum and a high strength metal impregnated epoxy. This repair is superior to the original configuration and should last the lifetime of the unit. (See pic below)

    Aside from the issue described above this unit is in excellent to near new condition and works great. With proper care and a 10,000 hour service life it will last a lifetime.

    Includes the following:

    Gen 3 M-703E ENVIS monocular with built in Infra-Red Illuminator, Eyecup, lanyard and soft case.

    Price $1300 shipped. I can accept Paypal(+3%) or certified funds.

    The following mounting accessories are also for sale with the unit:

    PVS J Arm adapted for ENVIS
    ACH helmet mounting plate
    Norotos night vision Rhino mount
    PVS-14 Rubber Eye cup

    This is everything needed to mount the ENVIS to a PRO-TEC or similar bump helmet or ACH/MICH helmet.

    Price $100.00 shipped for all 4 items.


    The Pro Tec OD green Bravo helmet pictured below features a suspension system designed specifically for night vision mounting. It is brand new, fits sizes 7 ½ to 7 7/8 and is available at my cost.

    Price $59.00


    I can accept Paypal(+3%) or certified funds.

    Nightvisionary2003@yahoo.com


    I absolutely will NOT ship outside the USA.






    Repair is visible in this picture.







    All night vision pics were taken during a complete overcast night with a slight suburban sky glow. Photos never quite capture the true image through optics. The actual image is superior to that represented in these photos.







    Last edited by Nightvisionary; 09-06-13 at 14:01.

  2. #2
    Join Date
    Dec 2010
    Posts
    1,422
    Feedback Score
    1 (100%)
    Price drop.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •