1: KAC SR15 intermediate. Or mid length.
2: 12-13"
3: Pinned lp gas block with KAC micros.
Can you guess which rifle I like yet?
|
||||||||||||||||||||||||||||||||||||||
midlength with a port sized to .073
13" handguard, using a troy alpha on my LW
flip sights for magnified optics
1. 16" with a mid length gas system
2. 13" tube style rail (VTAC Alpha)
3. Shaved FSB with flip up
Crazy timing this is being asked now. I'm in the middle of making a variation of a dissi from a KAC MOD1 with a sleeved F stamped front site at the rifle position. Still uses the KAC gas system. Part of the top of the rifle length URX3.1 needs to be cut. Interesting so far...
1. 16" mid-length. It's just smoother.
2. 9" is fine for me, I'm not going on Spec-op missions.
3. Standard FSB is what i've got on both my rifles, I like it. maybe I'm biased.
Last edited by tgizzard; 10-30-13 at 20:23. Reason: looks better now ..
1. I don't have a big preference on gas length but would probably lean mid length on a 16"
2. 12-13" - I have a 10" rail on one of mine that is ok but a touch short. No need for more than 13".
3. I like the fixed front sight in concept but it limits some options so I'm fine with a properly installed low profile has block/chopped FSB with folding BUIS.
On a 16" bbl:
1) mid length gas
2) 15" free-floated handguard
3) flip up sights
Before you suggest that licensing, background checks, or other restrictions for the 2nd Amendment are reasonable... Apply those same ideas to the 1st and 4th Amendments. Then tell me how reasonable they are.
16" mid length / angle drilled port
13-15" FF rail
Geissele SGB w/ set screws & pinned / KAC Micros
Bookmarks