Any Critique?

[Averageman]

Parts are:
BCM 12 inch upper, with a BCM bolt.
https://www.rainierarms.com/?page=sh...roduct_id=3410
Rock River LPK with Single Stage Trigger and Bone Stock Charging handle.
http://www.rockriverarms.com/index.c...ategory_id=388
http://www.rockriverarms.com/index.c...ategory_id=376
Phase Five buffer kit.
http://www.phase5tactical.com/produc...l-buffer-tube-
Aim Point PRO Red Dot.
MagPul ASAP end plate, Grip and Sling.
http://www.bravocompanyusa.com/Magpu...t-p/mag500.htm
http://www.bravocompanyusa.com/Magpu...mag506-coy.htm
http://cdn.magpul.com/images/uploads/16_976_popup.jpg
A left over GI Colt Carbine Foregrip out of the parts box.
28 1/4 OAL
Sorry for the long post, it's my first potential bild in years.
Thanks
A/M

[Ryno12]

Why not the 11.5" BCM?

Sent via Tapatalk

[Averageman]

Availability at the time when I had the cash in hand and the time to build it.
I would have prefered to go an inch shorter, but I am just as happy being able at this time to get what I order, when I order it.

[Ryno12]

Gotcha. So you already own everything on your list?

Sent via Tapatalk

[Averageman]

Yes I do.

[quaesitor logica]

Yes I do.

You will be just as happy with the 12 as you would an 11.5. Onlyt advantage i can see to the 11.5 is that are more 11 inch handguards out there than 11.5. But you have a solid build going there O.P. I think i would go with the KAK pistol extension designed to mount the SIGTAC brace on though.

[Iraqgunz]

Ditch the RRA parts kit and trigger. Get a BCM Gunfighter charging handle. Lose the Phase 5 thing and use a simple carbine tube. Use an H2 or 3 buffer.

[Iraqgunz]

You can use whatever parts you want. I simply provided my dos centavos. If it were me, I would get an ALG QMS trigger, a Battle Arms Selector and their pin set. Then I would get the little small items (springs, etc..) from Brownells. As for the pistol tube, I don't think anyone has shown conclusively shown that having a standard carbine *lower receiver extension is going to get you thrown into the Buttrape Hotel.

*Nothing here should be construed as legal advice, when in doubt consult 50 other internet sources.

[discreet]

You can use whatever parts you want. I simply provided my dos centavos. If it were me, I would get an ALG QMS trigger, a Battle Arms Selector and their pin set. Then I would get the little small items (springs, etc..) from Brownells. As for the pistol tube, I don't think anyone has shown conclusively shown that having a standard carbine *lower receiver extension is going to get you thrown into the Buttrape Hotel.

*Nothing here should be construed as legal advice, when in doubt consult 50 other internet sources.

If he already has the phase5 may as well keep it. I run a pistol tube just to stop stupid questions from being asked lol. The whole dude that's illegal, or dude thats intent, or how is that a pistol since you could put a stock on it ordeal just was worth skipping for me. Not like I don't have any normal RE's around but imo 50ish bucks was cheaper than time spend with stupidity.

Speaking of the pins, have you had good luck with the BAD pins?

[Averageman]

I ran about two hundred rounds through it yesterday.
Ran like a champ and was very accurate and fun to shoot.