IOR 2-12x32 eye relief solution?

[Rmplstlskn]

I wanted to throw this "option" out to the experienced glass shooters here before I drop $$$.

Scope will be on a 18" SPR-type rifle with Samson FF.


Since the IOR is a 35mm tube there are no options that I know besides the IOR rings that come with it. The eye relief is 3.5" and a NTCH cheekweld will require the front ring to mount to the rail of the FF RAIL HANDGUARD. This IS NOT a viable option, IMO. Also, no QD capability. So what to do?

Here is what I came up with. What are your opinions?

IOR 2-12x32 scope with IOR low rings
Larue Picatinny Riser QD


This would give a FORWARD rail for the front IOR mount, raise the height of the IOR low rings to clear most BUIS's, and give QD capability that Larue's excellent lever system provides.

Have I made a mistake somewhere here?

Rmpl

[Rmplstlskn]

Anyone have IOR RING MEASUREMENTS for their 35mm low/med/high rings?

I am still trying to calculate the lowest rings on the Larue Picatinny Riser that will clear a Troy rear BUIS with a 2-12x32 scope attached.

No one I know locally has an IOR to measure... and the web site is about useless for technical details.

Rmpl

[C4IGrant]

Anyone have IOR RING MEASUREMENTS for their 35mm low/med/high rings?

I am still trying to calculate the lowest rings on the Larue Picatinny Riser that will clear a Troy rear BUIS with a 2-12x32 scope attached.

No one I know locally has an IOR to measure... and the web site is about useless for technical details.

Rmpl

That should work. I would think low rings would work with the LT riser.

I have these risers in stock if you need one.



C4