https://www.primaryarms.com/Radical_...5pistol556.htm
Haven't heard of them...... Good price
https://www.primaryarms.com/Radical_...5pistol556.htm
Haven't heard of them...... Good price
Why a pistol-length gas system on a 10.5" barrel? Am I missing something?
I agree. I was under the impression the carbine gas system was designed for the 10.5" barreled Colt, but I could very well be wrong. I have never seen a pistol length gas system on a 10.5" barrel before, unless is was a 300 BLK which is completely different.
I don't know enough to have an opinion, but just like the often repeated discussion of dwell time and the 10.5 vs 11.5 barrel, could it be a trade off? Running extremely hard but more reliable than the same gun would be with carbine gas?
I bought a 10.5" Radical Firearms upper for my pistol build. It came with a carbine length tube. Runs great.
They must have updated the ad. It says carbine length now.
Experience is what you get... When you don't get what you want.
Are you Lawson11B? If so, I enjoy your YouTube videos. I just got an ALG SCB and your timing video helped a good bit.
Experience is what you get... When you don't get what you want.
No, sir. But I subscribe to his channel. That guy can shoot some steel challenge. My channel is bart hightower. I shoot USPSA for Team Sacramento Black Rifle.
[content removed]
Last edited by softorchestra; 01-05-15 at 21:44.
so
I refuse to participate in online forums which do not show respect to the members or their freedom of speech.
Well it's past time for my update so here goes. I picked up a seekins 10.5 300 from radical and because I was doing it on the cheap I ended up getting a pistol lower from palmetto and a bcg from another unnamed source. I thought I had an issue after 5 fte's. Pulled the big to look it over and low and behold the pin extractor was missing. Pulled a bolt from another gun and viola she runs like a monkey on a greased slide. Kudos to the folks at radical for putting out a quality product.
Bookmarks