Page 2 of 4 FirstFirst 1234 LastLast
Results 11 to 20 of 35

Thread: Cammenga EASYMAG EM#-556

  1. #11
    Join Date
    Jun 2008
    Location
    Down South
    Posts
    179
    Feedback Score
    0
    Quote Originally Posted by Rik View Post
    Can you slide open a loaded mag while it is in the mag-well?
    I have tried making the EasyMag open in my ARs Mag. well with the Mag. fully loaded with 30rds. And I sure can't make it open or even move. If someone else can do this I sure would like seeing a video of happening.

    The slide is locked in and with it inside a Mag well it's really IMHO not able to be unlocked and pulled down.

  2. #12
    Join Date
    Jun 2008
    Location
    Down South
    Posts
    179
    Feedback Score
    0
    Quote Originally Posted by rob_s View Post
    I didn't mean to imply that your thread was useless, only redundant. I did, however, mean to imply that the product is useless. Less than useless, in fact, since it costs 2-3 times as much as any other fully serviceable magazine.
    Well it's an open forum your thoughts and what you imply are just as important as anyone elses.

    I myself don't feel my thread was or is redundant no more redundant then the many many past MAGPUL P-Mags posts.

    I like to look at and try new products I am not a firearm industry professional nor am I employed in any way or shape with any firearm Mfg. or online firearm supply company.

    I have (bought) Magpul Mags C-Products Mags Brownnell's Mags Lancer System Mags I have OKay Mags USGI Mags. And now the Cammenga Mag. Maybe some other I have forgotten about having.

    Before the Cammenga and Lancer System Mags IMHO there was nothing really new in AR Mag. Design or Engineering.

    The Magpul P-Mag a great non metal Mag. but again there had been non metal Mags before maybe Magpul has a better design of their higer priced follower and some with a window but as for the total Mags. Std. package it's nothing really new.

    Same with Brownell's new metalMags. High quality but the same Design and Enginnering as any other USGI Mag.

    Now we have the Lancer System Mag. it's a new Design and Engineered non metal Mag. and it has a really quality Design with it's metal feed lips and see through material.

    Also we now have a really different metal Design and Engineered Mag. with the new Cammenga EasyMag. it's built from the bottom up new. New way to get it open for loading or unloading but it still can be loaded or unloaded in the way all other Mags can also a quick and easy way get it really clean when it's really needed.

    It's stronger with the heat treated steel of their Mags body and it's simple to really remove any foreign material that may get inside the Mag. If your Mags were dropped in the sands of Iraq how quickly could you clean it out of a Std. Mag that quickly?

    Yes I agree the price of the Cammenga EasyMag. is much higher then and Std. Mag. But it's lower priced then the H&K steel AR Mags and IMHO it's stronger and a much better all around Mag. then the H&K. And I am a BIG fan of the H&K Company.

  3. #13
    Join Date
    Oct 2006
    Location
    SE Michigan
    Posts
    632
    Feedback Score
    22 (100%)
    Quote Originally Posted by rifleshooter View Post
    I have tried making the EasyMag open in my ARs Mag. well with the Mag. fully loaded with 30rds. And I sure can't make it open or even move. If someone else can do this I sure would like seeing a video of happening.

    The slide is locked in and with it inside a Mag well it's really IMHO not able to be unlocked and pulled down.
    Steve tried this and proved they can be opened while in the AR. I'll ask him to take a quick video and post it.

    From your other post...

    Quote Originally Posted by Steve View Post
    yes it will open while in your gun bolt foward or locked back ... spilled some training rounds all over the floor. ill try to get pics this week for you guys or some video if i can. No thanks even more resolve to not use them

    Guys as many of us know if you want a metal mag get D&H mags with magpul followers plain and simple...

    if you want a non metal mag get Pmags and or Lancer. real simple.
    Full disclosure - I am an Engineering Supervisor at Trijicon, Inc.

  4. #14
    Join Date
    Jun 2006
    Location
    SE FL
    Posts
    14,148
    Feedback Score
    5 (100%)
    Quote Originally Posted by rifleshooter View Post
    I am a BIG fan of the H&K Company.
    Say no more.

  5. #15
    Join Date
    Jun 2008
    Location
    Down South
    Posts
    179
    Feedback Score
    0
    Quote Originally Posted by bullitt5172 View Post
    Steve tried this and proved they can be opened while in the AR. I'll ask him to take a quick video and post it.

    From your other post...
    Myself if I was making such a statment as Steve has made about the Cammenga EasyMag coming open while being locked fully loaded in the ARs Mag well I would want the suspect Mag. involved in the failure sent to and Independent material testing and Engineering Company so any unknown facts about the condition of the suspect Mag. could be fully examined and any finding made public if asked to do so.

    Also it would be good to have someone from Cammenga's EastMay Engineering Dept. also witness any Video of such a failure.

    Not implying Steve would not do a proper honest test on the Video but we are disscussing a product from a American Company who employees many people in the Mfg. of this new Mag. and has a lot invested in it' success or failure.

  6. #16
    Join Date
    Oct 2006
    Location
    SE Michigan
    Posts
    632
    Feedback Score
    22 (100%)
    Quote Originally Posted by rifleshooter View Post
    Myself if I was making such a statment as Steve has made about the Cammenga EasyMag coming open while being locked fully loaded in the ARs Mag well I would want the suspect Mag. involved in the failure sent to and Independent material testing and Engineering Company so any unknown facts about the condition of the suspect Mag. could be fully examined and any finding made public if asked to do so.

    Also it would be good to have someone from Cammenga's EastMay Engineering Dept. also witness any Video of such a failure.

    Not implying Steve would not do a proper honest test on the Video but we are disscussing a product from a American Company who employees many people in the Mfg. of this new Mag. and has a lot invested in it' success or failure.
    Full disclosure - I am an Engineering Supervisor at Trijicon, Inc.

  7. #17
    Join Date
    Mar 2008
    Location
    Oklahoma
    Posts
    102
    Feedback Score
    0
    Quote Originally Posted by rifleshooter View Post
    Myself if I was making such a statment as Steve has made about the Cammenga EasyMag coming open while being locked fully loaded in the ARs Mag well I would want the suspect Mag. involved in the failure sent to and Independent material testing and Engineering Company so any unknown facts about the condition of the suspect Mag. could be fully examined and any finding made public if asked to do so.

    Also it would be good to have someone from Cammenga's EastMay Engineering Dept. also witness any Video of such a failure.

    Not implying Steve would not do a proper honest test on the Video but we are disscussing a product from a American Company who employees many people in the Mfg. of this new Mag. and has a lot invested in it' success or failure.
    And you say you have no relationship with the company....

  8. #18
    Join Date
    Jun 2008
    Location
    Down South
    Posts
    179
    Feedback Score
    0
    Quote Originally Posted by Lagadelphia View Post
    And you say you have no relationship with the company....
    No.

    Maybe you should call or contact them and get a direct answer:

    CAMMENGA CORP

    100 ANILINE AVE. STE. 258
    HOLLAND, MI 49424

    PHONE:
    616-392-7999

    FAX:
    616-392-9432

    E-MAIL:
    info@cammenga.com

  9. #19
    Join Date
    Sep 2007
    Location
    TX
    Posts
    80
    Feedback Score
    0

    Thumbs down

    Quote Originally Posted by rifleshooter View Post
    Myself if I was making such a statment as Steve has made about the Cammenga EasyMag coming open while being locked fully loaded in the ARs Mag well I would want the suspect Mag. involved in the failure sent to and Independent material testing and Engineering Company so any unknown facts about the condition of the suspect Mag. could be fully examined and any finding made public if asked to do so.

    Also it would be good to have someone from Cammenga's EastMay Engineering Dept. also witness any Video of such a failure.
    What a bunch of baloney...

  10. #20
    Join Date
    Jun 2006
    Location
    Michigan
    Posts
    1,166
    Feedback Score
    0
    LOL spare me the 3 mags i have are all capable of doing so i stopped buying them after that move on your boring us. do what you like as it seams you will yes all th emags opened when seated in teh mag well it took a decent tug to do so but it can be done no thanks

    pay for an over priced heavy magazine.. next subject please.

Page 2 of 4 FirstFirst 1234 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •