Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: Benelli M4 Entry barrel work?

  1. #1
    Join Date
    Jun 2008
    Location
    Bloomingdale, GA
    Posts
    18
    Feedback Score
    0

    Question Benelli M4 Entry barrel work?

    Anyone know of anyone that works on Benelli NFA barrels?

    I've an M4 Entry that I want to put a Silencerco Salvo 12 adapter on, but have had no luck in finding anyone willing to do it.

    (& please do NOT recommend King Armory!! They had my barrel for MONTHS - I sent it in after a promising phone conversation, only to have them refuse to answer emails or calls. They finally sent my barrel back with NO work performed, citing "inability to find proper choke threading components". Whatever...)

    So, anyone else??
    Damon

    "Our obligations to our country never cease but with our lives." -- John Adams

  2. #2
    Join Date
    Jun 2006
    Location
    USA
    Posts
    3,151
    Feedback Score
    7 (100%)
    Might want to contact the folks at Vang Comp Systems. They might be able to help out.
    Love you Pop. F*ck Cancer.

  3. #3
    Join Date
    Apr 2010
    Location
    Illinois
    Posts
    160
    Feedback Score
    0
    I'd say try Vang Comp or Briley. Though I don't know if Briley does sbs stuff, they do a ton of shotgun work.
    "I can’t remember a mile in my life that was even mildly amusing"

  4. #4
    Join Date
    Oct 2010
    Location
    Northern Colorado
    Posts
    5,167
    Feedback Score
    60 (100%)
    Vang Comp told me they wont do work on my Benelli M4 barrel....

  5. #5
    Join Date
    Jun 2008
    Location
    Bloomingdale, GA
    Posts
    18
    Feedback Score
    0
    Vang Comp doesn't work on Benelli M4 barrels, & Briley won't touch any NFA stuff.

    I emailed everyone I could find on the 'net yesterday & actually got some replies this time.
    Rose Action Sports in KY will prolly do the work, once the new adapter comes in...
    Damon

    "Our obligations to our country never cease but with our lives." -- John Adams

  6. #6
    Join Date
    Mar 2015
    Posts
    1
    Feedback Score
    0
    Scattergun technology! They have done excellent work for me before.

  7. #7
    Join Date
    May 2013
    Posts
    59
    Feedback Score
    1 (100%)
    Scattergun Technologies doesn't truly exist anymore. They have been bought out by Wilson Combat in Berryville, AR about 15 years ago. As far as I know, they only do work on Rem. 870's.

  8. #8
    Join Date
    Aug 2014
    Posts
    33
    Feedback Score
    0
    Try contacting SilencerCo, they may have some insider information.

  9. #9
    Join Date
    Aug 2012
    Location
    DC
    Posts
    74
    Feedback Score
    0
    I know this is an old thread, but after a fair amount of searching, I don't think I have seen the answer. Has anyone successfully cut down a Benelli (M1 Super 90 or M2) barrel to 14-16" and thread it for a Salvo? My understanding is that the Benelli barrels are too thin at that point to thread them.

  10. #10
    Join Date
    Apr 2007
    Location
    Texas
    Posts
    11,468
    Feedback Score
    46 (100%)
    The only people I can think of would be Briley in Houston. They will do custom choke work, I am told.

Page 1 of 2 12 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •