This is the link to my build with a couple pictures and build list.
https://www.m4carbine.net/showthread...22#post2158522
First:
My lower will be shared with my carbine upper.
Will the 3 oz. carbine buffer and spring work with the precision upper with rifle length gas ?
From what I have read, it might but I do not want to batter anything when I take it out for my first test drive.
Second:
The PWS free float does not need gas tube orientation so I just torqued to 30 ft.lbs. three times(loosening in between) and then a final torque of 45 ft.lbs. with Moly greased threads.
Does that sound like a good torque to settle on ?
I have run low on my budget for the month so scope purchase will be later.
Also if you say I need a different buffer and spring setup.
I will just be shooting XM193 while doing the recommended barrel break in procedure from Lija(it is a pricey barrel and want to follow manufactures guidelines).
This is my first precision AR build.
Years ago I built an M1a that was really fun and very accurate.
Also shot midrange F/TR with a Savage in .308 and made Expert class.
Thinking to maybe use this for F class shooting also just for fun.
Any help is appreciated.
Thanks;
Clarence
Bookmarks