Scope too tall?

[n517rv]

...it will be too high compared to typical ballistics based off of a(n above) bore height of 1.5".

Just a point of clarification... for a 1.5" scope the typical above bore height is closer to 2.6":

From top of rail to center of bore 1.092"

Height of scope = 1.5"

Total = 2.592"

[ColtSeavers]

Just a point of clarification... for a 1.5" scope the typical above bore height is closer to 2.6":

From top of rail to center of bore 1.092"

Height of scope = 1.5"

Total = 2.592"

Thank you for the catch/clarification and apologies for missing that.

[Digital_Damage]

kind of pointless, if you want QD, get a QD.

You are just adding the possibility of recoil shift in two places instead of one.

[texancarbine73]

Point taken; the fact that could work is one thing but it's far from Ideal.
Thanks guys for all the comments. The Aeroprecission mount is solid
And very light. 3 screws is not a biggie to swap optics so I might just use that and if I find myself switching often then I would add a QD mount.
M4 community always helping silly ones like myself come to senses lol

kind of pointless, if you want QD, get a QD.

You are just adding the possibility of recoil shift in two places instead of one.

[ScottsBad]

Step 1: Clear the weapon.

Step 2: Chunk the chicom riser.

Step 3: Put the H1 on a 45°... if you must.

Why not sell both optics and get a 1xWhatever with a lit reticle?

I personally would mount up the H1 only and call it a day.

^^Agreed

--Too tall.
--Too weird.
--Too awkward.

Unless your eyes are mounted in your forehead.

If you are going to use the scope, just mount it to the rail.

[Tx_Aggie]

If it were mine I would ditch the work-around and go with an actual QD scope mount.

^^^ QFT

[Auto-X Fil]

You are all completely missing the obvious solution:

Buy another upper. :-)

Only half-joking...

[texancarbine73]

I was doing that as well lmao!!!
What a sickness!!!!

You are all completely missing the obvious solution:

Buy another upper. :-)

Only half-joking...

[texancarbine73]

I bought an ADM. Better to do it well.
Thanks guys!!

[ScottsBad]

Good choice.