Sons of Liberty Gun Works?

[berkeleygiraffe]

Not that it was a huge investment but I was very pleased with the lower parts kit I received from SOLGW. I've had kits before from what I thought was pretty reputable company's that were trash. Install in my stripped BCM lower was a breeze.

Now patiently waiting for their "competition" trigger for my AR pistol.

Just to add that was my experience as well. The small parts like detents are nitride I believe and it makes operation smoother. The one area I didn't care much for were takedown pins so swapping out with cmmg pins is my current go to "lpk" basis

[pcar157]

For the "unknowing" can you clarify/provide info the advantage to using "cmmg pins"?
Thanks

[berkeleygiraffe]

For the "unknowing" can you clarify/provide info the advantage to using "cmmg pins"?
Thanks

They have a little detent like fcd takedown pins and according to cmmg are also slightly extended like fcd. Pretty sure they're also nitrided. I know fcd is ss not sure what material cmmg is but they're smooth operating and feel quality.

55AFF3B.jpg

[pcar157]

They have a little detent like fcd takedown pins and according to cmmg are also slightly extended like fcd. Pretty sure they're also nitrided. I know fcd is ss not sure what material cmmg is but they're smooth operating and feel quality.

55AFF3B.jpg

Got it. Thank you!

[methical20]

The CMMG pins are also used on Hodge guns

[pag23]

They have a little detent like fcd takedown pins and according to cmmg are also slightly extended like fcd. Pretty sure they're also nitrided. I know fcd is ss not sure what material cmmg is but they're smooth operating and feel quality.

55AFF3B.jpg

Good to know..I just ordered a kit

[03Infantry415]

Just received and installed my SOLGW trigger. I think it feels smoother then an ACT or BCM.

[SOLGW]

This was a topic of discussion the other day.
I forgot I had this video.
Real world feedback is definitely welcome. We tested the shit out of it, and this was the best solution I could come up with as a blaster maker.
QPQ v CHF

https://m.youtube.com/watch?v=K8aIsB...ature=youtu.be

Sent from my SM-G973U using Tapatalk

[Duffy]

CMMG makes good stuff. PF-040 is 17-4 SS and black nitrided, the 040 designation denotes its 0.040 longer length (on the left side), it's unobtrusive when you don't need the extra length, but when you push the pins in from the left, there's more pin for your finger to grab onto as you pull the pins out.

[Eurodriver]

This was a topic of discussion the other day.
I forgot I had this video.
Real world feedback is definitely welcome. We tested the shit out of it, and this was the best solution I could come up with as a blaster maker.
QPQ v CHF

https://m.youtube.com/watch?v=K8aIsB...ature=youtu.be

Sent from my SM-G973U using Tapatalk

“Our target audience are people that actually ****ing shoot”

<3