How to build a Jeep CJ7 bug out vehicle.

[daddyusmaximus]

So I'm looking, and looking, and I can't for the life of me find bearing, and seals that are made in the USA. Damn NOTHING is made in the USA anymore. Really starting to tick me off. Took my front rotors in to NAPA to get them turned today, and checked there too. Made in Spain, Denmark, everywhere but the USA. At least it's not china or mexico... and their does have a 3 year warranty, so I ordered a bunch from there, and I'll take the mexican crap back to Auto Zone tomorrow.

Also picking up a CJ7 hard top tomorrow. I put out feelers for a swap as my CJ7 came with a YJ top. Real PITA seeing as it doesn't have the proper YJ tailgate to go with. The guy wasn't using it, it was just sitting in his barn. He wanted to sell, but agreed to swap just to be nice. His way of saying thank you for me being a veteran. Cool. So I get home and go to get mine ready to take up tomorrow... Problem. I had taken the hatch off mine, and stashed it in the shed so it wouldn't get broken. Guess what? I can't find the bolts to put it back on. Every single nut and bolt in the hole build is up in the garage in marked baggies... except these. Well, I message the guy (facebook) and tell him of the problem. I'm hoping like hell he won't mind seeing as how he's not gonna use it anyhow. The dude says "just come get this one, and sell yours to help with your Jeep." Holy cow. He's GIVING me a CJ7 top. Now it's not perfect. It's been repaired where the hatch hinges are, and there's a hole from a bubble light because it came off a plow Jeep, but, I ain't gonna turn down free parts... So glad I sat and talked with them for a while today.

Next thing. I go home and start in on the housing. Gotta clean it up to get ready for the new parts coming in. I notice something... the junkyard housing I got to replace my slightly bent original... isn't the same. The spring mounting surfaces are the same. The width is the same. they both use the same brakes, spindles, knuckles... but the old one has thicker wall tubing. It's only got the slightest little bend, from jumping real hard, so now I'm thinking maybe I should just get that one straightened, and use it. I won't be jumping, so the thicker wall tubing would be good insurance for me. Probably need different seals and bearings... Carrier fits either, so I guess a Dana 44, is a Dana 44... Gotta think on it, and see.

Old axle housing I blew the hub on.


Junkyard replacement I had to get because I couldn't find a spindle anywhere.

[daddyusmaximus]

Picked up my knuckles today with the new ball joint pressed in. Couldn't resist a test fit...



Also picked up my free CJ7 top. Turns out the 2 little holes where the woopie light was won't be much of a problem. I can either just silicone them, or put one of my leftover Army woopie lights there... The back hatch... well, that may be a different story. That falls squarely in the "What did you expect for free" category. It works... but it's not long for this world. It's been repaired on the top by the hinges, saw that yesterday. What I didn't see was the inside... It's gone... It will need replaced. I can still sell or trade my YJ top. Maybe take the hatch, and glass out of this to make a hard top bikini top for the summer...

[daddyusmaximus]

So, I jumped on the cragslist, and facebook sale groups in my area last night looking for a hatch for a CJ7 hard top. I figured I could sell my YJ top later to make up for buying one. Hell, I don't even remember how I got sidetracked into looking into tops, when I'm supposed to be buying parts for the front axle... I guess my TBI gave me some ADHD, but it's in my head now.

Never did find one, but I stumbled on something that made me think I may not need a CJ7 hatch... a YJ tub. This was 3 hrs away, but it was in way better shape than the CJ7 tub I went 3 states away to get. With the YJ style tailgate, I can just use my YJ top that came on my CJ, AND not have all those rust holes to fix. There's one issue, the trans tunnel has a little section missing because he was running a 700 HP big block Ford, C6, and 1 tons, but everything else is solid. Oh, and the glass is cracked in the windshield, but I have a 2 CJ windshields.

Talked to the guy, and he took it off the frame last night. I went down today and picked it up, along with the gas tank, since it feeds from the drivers side. Got the roll bar, power brake upgrade... and the chance to take apart, and clean a tub all over again.

Now I will be selling my CJ7 tub, and some associated parts to help offset what I just spent. (new kitchen roof money) In the end, I thing this will work out a lot better. I suppose I could still use the freebie CJ hard top. Seeing as the hatch is FUBAR, I could take it off, and the side glass out, and have a hard bikini top for the summer. Gotta have my shade.