G&R Tactical
Results 1 to 4 of 4

Thread: Colt 9mm two piece mag block?

  1. #1
    Join Date
    Jul 2009
    Posts
    124
    Feedback Score
    0

    Colt 9mm two piece mag block?

    I recently purchased a Colt 9mm sub machine gun parts kit from Ratworx. It came with with everything except the sear, selector ,which I had held out, and of course the lower. I already have a pistol lower that I was planning using. So I ordered a kak mag block.

    I installed the mag block but can not get it to hold a mag. The problem is that the mag block moves up when putting the mag in. Especially when the mag is loaded. The mag block has two set screws that should hold everything in place. I even tried drilling two indents in the lower to try to hold it in place with no luck. I'm not trying to trash kak and I have not taken the time to contact them.

    So I was thinking about using the two piece Colt mag block that came with the parts kit. Considering that lower receiver prices are at an all time low price and that I can not find a dedicated lower. So the question is does anyone know of a source for a template or a way to make a template to drill the holes? Or a shop that can do the work without totally screwing it up?
    Last edited by Pikey; 06-02-18 at 18:11.

  2. #2
    Join Date
    Aug 2007
    Location
    Phoenix Area
    Posts
    96
    Feedback Score
    0
    You need to drill two holes through the receiver and the block to make it stay. Or you can do what I did and jbweld the kak block into the receiver.

  3. #3
    Join Date
    Jul 2009
    Posts
    124
    Feedback Score
    0
    I’ve thought of drilling and pinning the Kak block in place. But if I’m going to drill holes in my receiver I might as well just use the colt two piece mag block.

  4. #4
    Join Date
    Aug 2007
    Location
    Phoenix Area
    Posts
    96
    Feedback Score
    0
    I agree if you have the colt conversion block just pin it.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •