-
Mini Review / First Impressions TriArc (Feddersen blank) barrel. 12.5 mid gas
Ok posting this as a new thread due to interest in the TriArc barrel
In my search for a sub moa 11.5 to 12.5 barrel I got many great suggestions and decided on TriArc due to reports of super high accuracy across a broad range of ammunition as well as being a soft shooter
I received and built up my TriArc (Feddersen blank) barrel. 12.5 mid gas
First impressions were that the barrel is devoid of markings. The only markings are on the barrel extension end. A small S on the left at 6 oclock and a small 4 on the right at 3 oclock. Anyone know what these denote? Also included were some stickers (lol?)
I measured the gas port with my OriginCal (certified) but it's not the best way to measure as it's not the exact diameter due to the offset tips of the internal?
Anyway - I got .073 and .075 measuring twice.
My SLR7 Sentry Ti adjustable gas block slipped right on
The barrel was pre-dimpled through the nitriding which was surprising. I'll need to grease that dimple to prevent rust right?
Weight was right at 662g (1 lb 5.94 oz) which is 21.94 oz
Heavier than my Spikes/FN 11.5 pencil which came in around 17.496oz. The TriArc looks like an HBAR next to the Spikes/FN pencil LOL
I am a bit disappointed as the TriArc site advertised the barrel at 1.37 lbs and this is 1.46 lbs. Looking back on the site, I see all the barrels up to the 14.5" are advertised at 1.37 lbs. The 16" says 1.71 lbs
That seems a bit sloppy at best and sketchy at worst.
I have Reman Black Hills 77gr OTM, 55gr IMI and 62g MagTech right now. If anybody has some favorite commercial ammo they'd like me to test I'd be amenable.
I'm planning on ordering some IMI 69gr RazorCore (77gr is OS) and some Speer Gold Dot LE 75gr SP unless someone says otherwise?
Upper Build List:
TriArc 12.5 Track 2.0 Barrel 5.56/Midgas
San Tan Upper receiver billet
2A Balios Lite 10.0 MLok Rail / AL Nut (Seasoned 3X and Torqued to 45ftlbs)
SLR7 Ti adjustable gas block
Brownells Nitride LW BCG
Griffin Stealth Flash Hider
Info from TriArc site
Length 12.5"
Material 4150V grade Milspec B-11595E Chromium-Molybdenum-Vanadium (CrMoV)
Profile TRACK
Finish Nitrocarburizing ( BLACKNITRIDE™ )
Extension Finish Np3®
Gas System Mid-Length
Gas Block Journal .750" Diameter w/ 1" Length
Twist Rate 1.7"
Muzzle 1/2x28 Threaded
Weight 1.37 Lbs
Other Info Barrels are turned on centers and never chopped down from longer lengths
Patent Number WO 2013074132 A1
Last edited by joeg26er; 06-25-18 at 10:15.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks