I need a new reloading press--FIRST IMPRESSIONS

[Uni-Vibe]

After 40 years, the old RCBS needs replacing. Unfortunately, RCBS presses are made in Red China and I don't want to buy one.

So: I need a new single stage press. I would prefer one with the option to attach a tubular priming unit on it.


What are y'all using? Any Redding users? If Redding is Made in USA, should I get one of them?

Any other suggestions?

[Bob Sacamano]

Only single stage worth considering is a Forster Co-ax. Only negative is that once you use it you will wish you got one 40 years ago.

Lots of options for dedicated priming tools. RCBS makes a decent one

[rjacobs]

Yup, 2nd the Co-Ax.

The priming on it is excellent, but its NOT fast, so a dedicated priming setup is needed if you need to prime a ton. For 100 its ok, but for 1000, no.

When I need to prime a lot of brass, I use my Dillon press just to prime.

[Krazykarl]

Get the rcbs bench mounted priming tool. Good speed. Good sensitivity. Once you use it, you will never want to use your over leveraged resizing press again. Oh, by the way I use a Lee classic cast. Oversized for magnum cases, lube points, great leverage, best used primer collection system.

[Uni-Vibe]

Yeow! Co-Ax is $330.00! What's so great about it? Looks hard to use with the handle sticking way up in the air?

[shadowrider]

I wouldn't trade my Redding T7 for anything. I think you could press axle bearings on it if you could rig it up.

And it's sure nice to have a couple of calibers setup and ready to go. They do have a priming tube setup for it, but I've not used it enough yet to have much of an opinion whether it's better than a hand held but it does work.

[Uni-Vibe]

Looks like I'm going to have to bite the bullet (!) and get a Forster Co-Ax and a RCBS bench mount priming tool.


Any other ideas?

[gunnerblue]

If I ever replace my RCBS, it’ll be with a Redding T7. All of the strengths of a true single stage with the added speed of progressive die changes.

[bigedp51]

After 40 years, the old RCBS needs replacing. Unfortunately, RCBS presses are made in Red China and I don't want to buy one.

So: I need a new single stage press. I would prefer one with the option to attach a tubular priming unit on it.


What are y'all using? Any Redding users? If Redding is Made in USA, should I get one of them?

Any other suggestions?

Don't believe all the rumors and the presses being made in China. They are still made in the USA by people who were tricked into voting for Trump by the Russians.

RCBS Rock Chucker Supreme Reloading Press
https://www.gunsinternational.com/gu...n_id=100453570



Technical Information

Press Type: Single Stage
Frame Material: Cast Iron
Frame Design: O-Frame
Frame Offset:
Frame Opening Size:
Handle Location: Bottom Right or Left hand
Die Size Accepted: Standard 7/8"-14 threaded dies and 1-1/4"-12 dies with bushing removed
Die Bushing Accepted: Yes
Die Bushing Brand Used: RCBS
Spent Primer Collection System: Yes
Ram Stroke: 4"
Ram Diameter:
Priming Feature: Priming Arm, will also accept RCBS Ram Priming Unit (sold separately)
Number of Mounting Holes: 2
Mounting Hardware Included: No
Additional Features:
Warranty: Lifetime warranty for home reloaders, warranty does not cover equipment used for commercial purposes
Notes: Dies and Shellholders sold separately

Made In United States of America

[drtywk]

Don't believe all the rumors and the presses being made in China. They are still made in the USA by people who were tricked into voting for Trump by the Russians.

Sorry your girl didn't win...