Odin Works stainless steel adjustable gas block

[dud3r]

Trying to tune this thing. Only problem is I also have a BCM handguard that is way too difficult to remove. Does anyone know what size screws they use for the adjustment screw? Thinking of just ordering a really long hex key.


Sent from my iPhone using Tapatalk

[justin_247]

Trying to tune this thing. Only problem is I also have a BCM handguard that is way too difficult to remove. Does anyone know what size screws they use for the adjustment screw? Thinking of just ordering a really long hex key.

Suggestion:
https://www.odinworks.com/7_64_Ball_...-7-64-ball.htm

[dud3r]

Suggestion:
https://www.odinworks.com/7_64_Ball_...-7-64-ball.htm

Thanks but that isn’t compatible with the stainless block. I know it’s not 7/64. Went to Home Depot and got a long 7/64 and it did not fit. Smallest I have is 3/32.


Sent from my iPhone using Tapatalk

[justin_247]

Thanks but that isn’t compatible with the stainless block. I know it’s not 7/64. Went to Home Depot and got a long 7/64 and it did not fit. Smallest I have is 3/32.

E-mail Odin Works, the group that made your block.

Otherwise, Google is your friend:
https://www.all-spec.com/Catalog/Han...ers/10705-6669

[dud3r]

E-mail Odin Works, the group that made your block.

Otherwise, Google is your friend:
https://www.all-spec.com/Catalog/Han...ers/10705-6669

I did email them. And they gave me the same answer. Which is why I have tools down to 3/32 that don’t fit.


Sent from my iPhone using Tapatalk

[MistWolf]

Odin Works told you the screw is supposed to be 7/64 and it's not?

[GH41]

I did email them. And they gave me the same answer. Which is why I have tools down to 3/32 that don’t fit.


Sent from my iPhone using Tapatalk

Maybe you aren't holding your mouth right. When you get that small (5/64) a set screw is pretty fragile. Like use one time and replace fragile if you get it out. That's a bad place to use a screw that small especially in stainless steel.