Should I switch to a Cold Hammer Forged Barrel?

[SouthwestAviator]

I've got a Colt 6920, and am wondering if it's worth switching to an AR (or another upper, but probably new rifle altogether) with a cold hammer forged barrel. I've never had any problems with my Colt but I do wonder if down the road, as I shoot increasing numbers of rounds at a time, I'll wish it had the longevity of a CHF barrel. I like the Colt a lot and it's never jammed, but reading so much about CHF vs button cut (mil spec) has planted concerns in my mind about how long it will last before accuracy starts to degrade. I find myself looking at AR manufacturers who use CHF barrels, but I also don't really want to go through with it unless I determine it's for the best.

8000 is the number I see a lot concerning the longevity of a mil spec barrel. That doesn't seem like a lot.

I know the obvious solution is to keep the Colt and get another AR, but that's not really an option for now. I'd have to sell the Colt to fund another gun.

[SteveL]

I would not part with the Colt simply to get a rifle with a CHF barrel.

[AKDoug]

I've got a Colt 6920, and am wondering if it's worth switching to an AR (or another upper, but probably new rifle altogether) with a cold hammer forged barrel. I've never had any problems with my Colt but I do wonder if down the road, as I shoot increasing numbers of rounds at a time, I'll wish it had the longevity of a CHF barrel. I like the Colt a lot and it's never jammed, but reading so much about CHF vs button cut (mil spec) has planted concerns in my mind about how long it will last before accuracy starts to degrade. I find myself looking at AR manufacturers who use CHF barrels, but I also don't really want to go through with it unless I determine it's for the best.

8000 is the number I see a lot concerning the longevity of a mil spec barrel. That doesn't seem like a lot.

I know the obvious solution is to keep the Colt and get another AR, but that's not really an option for now. I'd have to sell the Colt to fund another gun.

8000 rounds is $2800 worth of ammo. Barrels are wear items and are easily replaced. When, and if, you get to 8000 and see some sort of degradation in accuracy replace it.

[magister]

I’d keep the Colt as is, and replace the barrel when/if it wears out.

[MegademiC]

I've got a Colt 6920, and am wondering if it's worth switching to an AR (or another upper, but probably new rifle altogether) with a cold hammer forged barrel. I've never had any problems with my Colt but I do wonder if down the road, as I shoot increasing numbers of rounds at a time, I'll wish it had the longevity of a CHF barrel. I like the Colt a lot and it's never jammed, but reading so much about CHF vs button cut (mil spec) has planted concerns in my mind about how long it will last before accuracy starts to degrade. I find myself looking at AR manufacturers who use CHF barrels, but I also don't really want to go through with it unless I determine it's for the best.

8000 is the number I see a lot concerning the longevity of a mil spec barrel. That doesn't seem like a lot.

I know the obvious solution is to keep the Colt and get another AR, but that's not really an option for now. I'd have to sell the Colt to fund another gun.

Shoot it out, then try a chf barrel if you want. I highly doubt you will realize performance gains or financial benefits by switching.

I have a chf barrel and my groups are on par or less accurate than molon’s colt tests.

[grizzman]

The short answer is "nope, don't replace it until it's worn out." I'd take a Colt barrel over many competing CHF ones.

[SouthwestAviator]

Does Colt or any other mil spec button barreled manufacturer have a number of rounds they recommend changing the barrel at?

I've been searching all over but can't find anything definitive... probably because a large part of it has to do with the rate of fire at which those rounds were shot. If anyone has any idea though, I'd appreciate it.


I'm aware of "Filthy 14" and its button barrel but iirc they didn't say at what round count the groups started opening up, only that by the end it was doing 2" groups at 50 yards. My gun is a defensive carbine and at typical distances even degraded accuracy wouldn't make a difference, but I'd want to replace the barrel when it starts showing signs of accuracy degradation just for preventative maintenance.

If anyone has a 6920 with a high round count (over 5-6k) I'd love to hear a report.

I'd take a Colt barrel over many competing CHF ones.

Interesting. Why is that?

[Wake27]

Does Colt or any other mil spec button barreled manufacturer have a number of rounds they recommend changing the barrel at?

I've been searching all over but can't find anything definitive... probably because a large part of it has to do with the rate of fire at which those rounds were shot. If anyone has any idea though, I'd appreciate it.


I'm aware of "Filthy 14" and its button barrel but iirc they didn't say at what round count the groups started opening up, only that by the end it was doing 2" groups at 50 yards. My gun is a defensive carbine and at typical distances even degraded accuracy wouldn't make a difference, but I'd want to replace the barrel when it starts showing signs of accuracy degradation just for preventative maintenance.

I’m not aware of any manufacturers that state life expectancy because as you said, it depends on a lot of factors. You’re best bet is probably going to be grouping it periodically, like after every other range day. You’ll have to decide when it opens up too much for your liking and then replace it. The good news is that Colt barrels always seem to perform well above the price point of the rifles they’re on.

I think the 8k thing is just what the military’s minimum requirement was, but I can’t remember where I read that so I may be wrong. What’s your barrel at right now?


Sent from my iPhone using Tapatalk

[kwelz]

You are overthinking this.

Shoot it. When it starts having grouping issues or keyholing or something similar then get a new barrel of your choice.

How many rounds are you going to shoot a year? What kind of shooting are you doing? Most people will never wear out a barrel and worrying about it is just silly unless you plan on shooting 1000+ rounds per month every month. And even then it will take a long time.

[opngrnd]

The short answer is "nope, don't replace it until it's worn out." I'd take a Colt barrel over many competing CHF ones.

^This. Colt barrels are the gold standard. There are attributes that some may find desirable over a Colt barrel (such as a different gas system, profile, contour, etc) but it's not a knock on the Colt barrel. I have several different barrels on my carbines and I don't feel the Colt barrel gives up anything to them. If I'd started off with Colts rather than hobby grade rifles, I'd probably just have bought a couple Colts and been done with it for carbines.