|
||||||||||||||||||||||||||||||||||||||
Member
I just got a P&S ras and was trying to install it in my rifle. For the life of me I cannot the rail under the delta ring. And there are gouged in the rail where the barrel nut appears to be preventing the rail from seating. Any ideas?1533992997253-225903616.jpg1533992997253-225903616.jpg1533993222047-833274699.jpg
Last edited by odugrad; 08-11-18 at 08:15.
Member
I've already insured the screw is removed and the gas tube rails sit on either side if the gas tube. And it applies to the bottom half of the rail as well as the top.
Last edited by odugrad; 08-11-18 at 08:12.
Industry Professional
I have seen this happen with barrel nuts that weren't timed properly. What upper are you putting this on?
Owner/Instructor at Semper Paratus Arms
Facebook: https://www.facebook.com/SemperParatusArms/
Semper Paratus Arms AR15 Armorer Course http://www.semperparatusarms.com/cou...-registration/
M4C Misc. Training and Course Announcements- http://www.m4carbine.net/forumdisplay.php?f=141
Master Armorer/R&D at SIONICS Weapon Systems- http://sionicsweaponsystems.com
Member
A BCM. I figured it would be good to go.
Member
Anyone have any ideas on how to fix this?
Site Sponsor
Nope, have you seen these:Originally Posted by odugrad
http://looserounds.com/2014/05/23/ho...-m4-or-m5-ras/
http://www.quarterbore.com/library/p...c_ras_inst.pdf
Do you have a hand guard removal tool: https://www.brownells.com/gunsmith-t...prod24202.aspx
I'm simply asking if you are sure you are getting the Delta Ring as far back as it needs to be.
Good luck.
Patriotism means to stand by the country. It does not mean to stand by the President... - Theodore Roosevelt, Lincoln and Free Speech, Metropolitan Magazine, Volume 47, Number 6, May 1918.
Every Communist must grasp the truth. Political power grows out of the barrel of a gun. Our principle is that the Party commands the gun, and the gun must never be allowed to command the Party Mao Zedong, 6 November, 1938 - speech to the Communist Patry of China's sixth Central Committee
Site Sponsor
It couldn't be the rail.
Gettin' down innagrass.
Let's Go Brandon!
Industry Professional
"Anything made by made is subject to failure". Wilius Gunnus Smithus 59 A.D. Not saying that it is the upper/barrel nut. But, I have seen some instances of it happening.
Have you considered having someone else look at it to rule out operator headspace?
Owner/Instructor at Semper Paratus Arms
Facebook: https://www.facebook.com/SemperParatusArms/
Semper Paratus Arms AR15 Armorer Course http://www.semperparatusarms.com/cou...-registration/
M4C Misc. Training and Course Announcements- http://www.m4carbine.net/forumdisplay.php?f=141
Master Armorer/R&D at SIONICS Weapon Systems- http://sionicsweaponsystems.com
Posting Permissions
Reply With Quote
Bookmarks