|
||||||||||||||||||||||||||||||||||||||
Site Sponsor
Please excuse my ignorance in this.
Does no one offer an standard front sight base without the front sight?
From my perspective, I would gladly pay for this. Otherwise, my options seem to be to take to an armorer/mail to ADCO to shave down my existing front sight base or put on a low profile gas block with a set screw (not that this is a problem). I would happily choose to re-use my pin holes for an option that does not involve any more modifications to the barrel.
Manufacturer
Pin holes are drilled after assembly, which effectively makes them "custom" for each individual barrel and generally NOT interchangeable with other FSBs or gas blocks.
Black River Tactical
BRT OPTIMUM Hammer Forged Chrome Lined Barrels - 11.5", 12.5", 14.5", 16"
BRT EZTUNE Preset Gas Tubes - PISTOL, CAR, MID, RIFLE
BRT Bolt Carrier Groups M4A1, M16 CHROME
BRT Covert Comps 5.56, 6X, 7.62
Site Sponsor
Thank you
Industry Professional
FSB installation is not for 0815 Menschen.
Colt Barrel Installation.jpg
Owner/Instructor at Semper Paratus Arms
Facebook: https://www.facebook.com/SemperParatusArms/
Semper Paratus Arms AR15 Armorer Course http://www.semperparatusarms.com/cou...-registration/
M4C Misc. Training and Course Announcements- http://www.m4carbine.net/forumdisplay.php?f=141
Master Armorer/R&D at SIONICS Weapon Systems- http://sionicsweaponsystems.com
Senior Member
You could dremel your own fab off and paint it.
Member
20 minutes with proper tools and you can chop/profile it yourself. Black high temp paint works great for refinishing.
More secure shaved and double taper pinned than any other setup.
"Never shoot a large caliber man with a small caliber projectile ".
Posting Permissions
Reply With Quote
Bookmarks