BRT OPTIMUM Barrels

[Clint]

Barrels are getting the hot dip this week, so we're currently projecting to be shipping out the week before Christmas.

The weight is just the barrel assembly. These are medium contour for strength and accuracy.

Still expecting a ship date on those 11.5" gas drive barrels by end of month?

Also - is the 23.1 oz for those including the gas block/gas tube? Or just the barrel assembly itself?

Excited to get mine!

[Wake27]

Any plans for a normal 14.5 in either a LW or medium contour?

[Clint]

Any plans for a normal 14.5 in either a LW or medium contour?

Normal?

[Wake27]

Normal?

Sorry. Standard 14.5 as opposed to your 14. I don't think that one would work with my G MK16 rail if I wanted to suppress it.

[Clint]

Most likely yes on the 14.5, as we've received strong interest in the very similar 14.0, which were done as a special request for a dealer.

[opngrnd]

Most likely yes on the 14.5, as we've received strong interest in the very similar 14.0, which were done as a special request for a dealer.

Neat info. I went the 14" route because it was compatible with the specific suppressor mount I was already going to use. I had wondered if it wasn't to give certain people a shorter non-nfa combo.

[scooter22]

Most likely yes on the 14.5, as we've received strong interest in the very similar 14.0, which were done as a special request for a dealer.

I’m definitely interested in a 14 or 14.5

[Clint]

Neat info. I went the 14" route because it was compatible with the specific suppressor mount I was already going to use. I had wondered if it wasn't to give certain people a shorter non-nfa combo.

The 14.0 meets minimum length with muzzle devices 2.67" or longer.

BE Meyers 249F
SF Socom SF3P-556
SF Warcomp
Dead Air Flash Hider
Noveske KX5
SOLGW NOX Keymount


The 14.5 opens up quite a bit more options for compatible muzzle devices.

[opngrnd]

The 14.0 meets minimum length with muzzle devices 2.67" or longer.

BE Meyers 249F
SF Socom SF3P-556
SF Warcomp
Dead Air Flash Hider
Noveske KX5
SOLGW NOX Keymount

I'll have to break out the calipers when I get home. I have the SF SOCOM muzzle brake on the shelf, and approximately 9 weeks until the can arrives. The brake is listed at 2.7", hopefully that's an accurate measurement.

[Wake27]

Most likely yes on the 14.5, as we've received strong interest in the very similar 14.0, which were done as a special request for a dealer.

That’s good to know, I’d be all about the 14” if the MK16 was 13” and I didn’t want to use the closed tine WarComp.


Sent from my iPhone using Tapatalk