Sling options for M92 PAP SBR

[ClearedHot]

Looking for some 2 point sling options for a M92 PAP SBR configured exactly like this:


Thanks in advance.

[trvsAR]

https://www.brownells.com/shooting-a...prod45023.aspx

Sent from my SM-G950U using Tapatalk

[Ron3]

https://www.brownells.com/shooting-a...prod45023.aspx

Sent from my SM-G950U using Tapatalk

Yea, I've used that. It works. Steel. Moves your grip a down just a tad IIRC.

It will not break or come off. Always clean thoroughly (male and female threads) with alcohol and then use a large amount of blue loctite on the pistol grip screw.

[trvsAR]

^^
this attaches under your pistol grip i uave no experience with it but it looks to simple to not work

Sent from my SM-G950U using Tapatalk

[Nocaster]

I have that exact configuration, except with a brace attached to the cnc warrior hinge instead of the tubular stock in the picture. I use the qd socket on the hinge mechanism(it's visible in your picture) and a regular ak clip up front. I was using an IWC UWL loop upfront before, but switched to the AK clip as it twists around less. I might try mounting a qd socket to the handguard someday, but am happy with the current setup.

Sent from my SM-G965U using Tapatalk