G&R Tactical
Results 1 to 5 of 5

Thread: Sling options for M92 PAP SBR

  1. #1
    Join Date
    Sep 2010
    Posts
    588
    Feedback Score
    1 (100%)

    Sling options for M92 PAP SBR

    Looking for some 2 point sling options for a M92 PAP SBR configured exactly like this:


    Thanks in advance.

  2. #2
    Join Date
    Sep 2018
    Posts
    44
    Feedback Score
    0
    https://www.brownells.com/shooting-a...prod45023.aspx

    Sent from my SM-G950U using Tapatalk

  3. #3
    Join Date
    Sep 2018
    Posts
    44
    Feedback Score
    0
    ^^
    this attaches under your pistol grip i uave no experience with it but it looks to simple to not work

    Sent from my SM-G950U using Tapatalk

  4. #4
    Join Date
    Sep 2007
    Location
    Florida
    Posts
    1,167
    Feedback Score
    0
    Quote Originally Posted by trvsAR View Post
    https://www.brownells.com/shooting-a...prod45023.aspx

    Sent from my SM-G950U using Tapatalk
    Yea, I've used that. It works. Steel. Moves your grip a down just a tad IIRC.

    It will not break or come off. Always clean thoroughly (male and female threads) with alcohol and then use a large amount of blue loctite on the pistol grip screw.
    Last edited by Ron3; 10-08-18 at 19:58.

  5. #5
    Join Date
    Jan 2012
    Location
    Oregon
    Posts
    63
    Feedback Score
    18 (85%)
    I have that exact configuration, except with a brace attached to the cnc warrior hinge instead of the tubular stock in the picture. I use the qd socket on the hinge mechanism(it's visible in your picture) and a regular ak clip up front. I was using an IWC UWL loop upfront before, but switched to the AK clip as it twists around less. I might try mounting a qd socket to the handguard someday, but am happy with the current setup.

    Sent from my SM-G965U using Tapatalk

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •