Thinking about pulling my 16" Armalite barrel and replacing it with their 18" stainless one on my AR10, anyone know how their 18" stainless shoot?
Thanks,
Thinking about pulling my 16" Armalite barrel and replacing it with their 18" stainless one on my AR10, anyone know how their 18" stainless shoot?
Thanks,
It’s been quite a few years since I’ve played with Arma light, however I did swap a standard barrel to an Armalight target model. Group decreased by about half, it wasn’t a super accurate shooter. It did shoot 1.25-1.5” groupings. If I remember correctly I was shooting 168gr FGMM.
** Don’t think it matters, but this was with the older B model that used modified M14 mags
Last edited by hk_shootr; 11-09-18 at 06:45.
Proper Planing Prevents Piss Poor Performance.......
If I can cut groups by 50% overall ( the good stuff shoots 1.5" and the 150 gr FMJ shoots 3 to 4" at 100yds) I'd be happy! With the stock barrel after 3 shots groups open quick and if I could cut the blast a pinch I'd be a happy man. Overall this Armalite AR10 has been flawless and with D&H 20 round mags it has been problem free.
I have an AR103GN18 with their stainless barrel and it shoots 3/4 MOA with a couple different loads. I'm definitely happy with it.
How's the profile on the 18" stainless?
About 3/4" OD under the handguards, and slightly less forward of the gasblock. I'd call it "medium", but I have no idea what they actually call it. It's a good mix between light enough to carry around, but thick enough to hold zero well.
Full review is here: https://www.m4carbine.net/showthread...R103GN18/page2
Last edited by Matt in TN; 11-13-18 at 18:29.
Kinda what I'm looking for, 16" factory shoots good for 3 shots then groups open fast! What gas block you using?
Reusing the factory barrel extension for new barrels?
If replacing with a new extension what company would you go with? For some reason there seem to be very few companies that support anything Armalite, but then I guess the extension won’t matter... 🙄 duh
Rarely see anything posted or discussed about the big “A”, even after they adapted to DPMS/SR25 mags.
Just curious...
Bookmarks