Results 1 to 6 of 6

Thread: Reptilia DOT Mount for Aimpoint T-1/T-2

  1. #1
    Join Date
    Dec 2018
    Posts
    67
    Feedback Score
    0

    Reptilia DOT Mount for Aimpoint T-1/T-2

    Good morning, gents.

    Today Reptilia is launching our first stand alone optic mount product, the DOT mount for Aimpoint T-1/T-2. It's nothing too crazy, just a simple, slim, rigid lower-1/3 mounting solution that doesn't have big knobs or levers hanging off the side. QD is still in high demand on the commercial side, and we'll never rule it out completely, but QD just seems a bit unnecessary for a 1x red dot in our opinion - different strokes for different folks. The black nitride coated clamp and cross bolt are spring loaded, so no fumbling around with parts during installation. All three colors (black, FDE, and clear) are milspec Type III hard coat anodized, but only black is shipping today, followed by FDE in a couple weeks. We're going to be expanding our offerings to additional optic platforms and heights (yes, 1.93" is coming), eventually leading up to a much more meaningful entry into the mount market later this summer with a truly novel product that adds much needed capability to certain weapon systems.

    In the meantime, please comment if you have any specific requests or feedback! The DOT mount can be found here: https://reptiliacorp.com/products/red-dot-mount

    -Nick










  2. #2
    Join Date
    Jul 2010
    Posts
    9,532
    Feedback Score
    45 (100%)
    Looks good. When to anticipate the clear one to roll out? It would look hot on a gray ghost I've been slowly piecing together.
    Gettin' down innagrass.
    Let's Go Brandon!

  3. #3
    Join Date
    Dec 2018
    Posts
    67
    Feedback Score
    0
    Quote Originally Posted by titsonritz View Post
    Looks good. When to anticipate the clear one to roll out? It would look hot on a gray ghost I've been slowly piecing together.
    Clear will be a few weeks yet. The anodizing is gorgeous, but the entire first batch had shallow engraving depth on the text, so we had to scrap them. The joys of quality control...

  4. #4
    Join Date
    Jul 2010
    Posts
    9,532
    Feedback Score
    45 (100%)
    Quote Originally Posted by Reptilia View Post
    Clear will be a few weeks yet. The anodizing is gorgeous, but the entire first batch had shallow engraving depth on the text, so we had to scrap them. The joys of quality control...
    Sweet, that will be perfect timing for me.
    Gettin' down innagrass.
    Let's Go Brandon!

  5. #5
    Join Date
    Dec 2007
    Posts
    2,415
    Feedback Score
    125 (100%)
    Does adding additional optic platforms mean adding a scopemount line or just adding other brands of red dot mounts ?

  6. #6
    Join Date
    Dec 2018
    Posts
    67
    Feedback Score
    0
    Quote Originally Posted by Biggy View Post
    Does adding additional optic platforms mean adding a scopemount line or just adding other brands of red dot mounts ?
    We're going to do the common red dot interfaces, including a couple that are not yet commercially available, but no current plans for variable power optic mounts. We have one particular product that will be pretty interesting which should launch this summer pending testing/safety approval by a couple MIL/LE customers.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •