Results 1 to 10 of 18

Thread: ATF's "Forward Observer" rifle...

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Jan 2007
    Posts
    5,089
    Feedback Score
    0

    ATF's "Forward Observer" rifle...

    ATF wants a new precision rifle with the below specs. Anything off-the-shelf come close?:


    Specifications for thirty five (35) each ATF Forward Observer replacement weapons:

    The desired weapon will be an ArmaLite (AR) style platform to replace the aging AR10 weapons that we currently have.
    The following specifications are required and MUST be met or exceeded:

    7.62X51 semi-automatic rifle system with a 16 inch 1:10” twist match grade barrel with full billet upper and lower Weight and length requirements:

    Without suppressor and empty magazine – not to weigh over 8 lbs. 8 oz.

    With suppressor attached and empty magazine – not to weigh over 9 lbs. 12 oz.

    Without suppressor attached – Overall All Length (OAL) cannot exceed 34 3/4” stock collapsed or 37 3/8” stock fully extended

    With suppressor attached – OAL cannot exceed 38 7/8” stock collapsed or 41 3/8” stock fully extended

    Flat Dark Earth (FDE) colored Cerakote-type coating over Mil-Spec hard anodized upper and lower receivers; also stocks, fore grips

    Full rifle-length gas system

    Low-profile gas block

    Mil-Spec Magnetic Particle Inspected (MPI) Bolt Carrier Group with NP3 coating

    Magpul CTR Butt Stock

    AR style pistol grip

    Barrel length M-lock fore grips

    Geissele SSA-E trigger group (specified trigger assembly because this is the current trigger we have installed on AR-10s and this is a continuity-of-training issue)

    Qty., 20-round polymer/metal lipped magazines

    Weapon must have sustained sub minute-of-angle (MOA) accuracy with agency specified ammo (Vista/Federal 168 grain Gold Medal Match BTHP and Vista Federal 168 Grain Tactical Bonded)

    Operators manual

    Lifetime Limited Warranty on weapons

    Each rifle will have a 7.62X51 Sound Suppressor included with the below specifications: • Attached via a rapid-thread muzzle brake, FDE colored Cerakote-type coating applied • Weight cannot exceed 1 lb. 2 oz. • OAL cannot exceed 6 1/4” Soft nylon carrying case

    FAR Clause 52.209-4 First article testing “may” be requested by ATF to verify ALL of the above specifications are met. If implemented: One rifle MUST be sent to ATF within seven (7) days of the request. Shipping will be paid by the vendor. Delivery date of TOTAL order thirty five (35 Rifles). Initial delivery of twenty (20 Rifles) MUST be delivered, no later than 8/1/2019 . The remaining fifteen (15 Rifles) will be set up as an Option. The Government will have the right to procure an additional (15 Rifles) within a 12 month period.

    https://www.fbo.gov/index?s=opportun...=core&_cview=1
    Last edited by Slater; 05-03-19 at 18:59.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •