Originally Posted by
tehpwnag3
Others might, I do not use a torque screwdriver. I just clean/prep the threads on both the screws and GB, apply a TINY DOT of Rocksett (or Loctite) to the threads of the screws and snug down finger tight. I do let the wrench tail slightly bend a little but never to the point that it's going to snap, barber pole twist, or strip the head. Just "snug tight". That way it's not going to move under fire but I'll be able to remove them if I need to, and sometimes it is not an easy thing to do.
I'd like to hear what others do as this is just the way I do it.
Bookmarks