Wake, KAC ehh, no surprise that bad boy shot lights out. Hope you get your other rig straightened out. I only have had one totally shitty barrel, Faxon. Many other folks had good results with them but mine sucked are.
PB
Wake, KAC ehh, no surprise that bad boy shot lights out. Hope you get your other rig straightened out. I only have had one totally shitty barrel, Faxon. Many other folks had good results with them but mine sucked are.
PB
"Air Force / Policeman / Fireman / Man of God / Friend of mine / R.I.P. Steve Lamy"
Unfortunately, I'm all out. The only thing I have left is the PPU, which I'm just going to burn through. I really like how well the FGMM 77gr shot in everything, but at this point I'm more concerned about stashing a decent training round since I've really only had junk for a while. I'm tempted to try the 62gr OTM from Winchester since that's such a cheap round and seems like a good compromise.
Sic semper tyrannis.
I love my Mod 2 SR-15, 16”. I’m moving the Aimpoint on it to a DD upper I bought, and placing a Kahles 1-6 on the SR-15. The 16” SR-15 is like a DMR or Recce rifle for real. Love it to death.
Yeah the KAC will get my Razor and part of the reason I went with the 16” is because I figured it’d fulfill that role for me, so I’d likely not get the LPR. The EOTech will go on the BCM in my OP when it gets back on Friday.
Sent from my iPhone using Tapatalk
Sic semper tyrannis.
Got the upper back but there was no note or email. I‘m pretty sure they replaced the barrel but won’t be able to test it for another week to be sure.
Sent from my iPhone using Tapatalk
Sic semper tyrannis.
So it turns out I think my Razor is toast after the fall it took last year. I was pretty confident that BCM replaced the barrel in question, but today I was still getting garbage results while shooting the Razor. When I switched to my EXPS 3-2, it got noticeably better. I still had an occasional flier, but the noticeable shift in the middle of a group stopped and I had a few really solid groups IMO. Both of these guns are back ups, and I was really missing the flat bowed SD-E in my primary lower.
Called the low round on the below target. I jumped that trigger a little early.
I sped up the cadence on target 18 and knew two of the shots were a little sloppy.
Last edited by Wake27; 07-07-19 at 15:32.
Sic semper tyrannis.
Sent from my iPhone using Tapatalk
Last edited by Wake27; 07-07-19 at 15:45.
Sic semper tyrannis.
Double checked the mount correct?
Sent from my iPhone using Tapatalk
This time I didn’t, but the last few range sessions I verified torque on the rings and the base in between every single group and have yet to find something loose. It was mounted to the Geissele upper in the last photo and was blown off a bench last year, landing on concrete, directly on the top turret and ocular lens housing. I fired 2-3 groups at 50m to see if the zero shifted but that was it at that distance until the LPVO class I mentioned in my OP.
The BCM upper had been tested with another scope as mentioned in my OP and was underwhelming even with that one, so I still think that wasn’t a great barrel (2-3 MOA with OTMs). But the bigger problem of the shift in the middle of the group was due to the scope though, at least that’s my current theory. I’ll contact Vortex, it’d be cool if they could provide me some feedback after they take a look at it.
Sent from my iPhone using Tapatalk
Last edited by Wake27; 07-07-19 at 15:56.
Sic semper tyrannis.
Coming late to the party, but I got a very decent group at 100 with 77gr Black Hills OTM, around 2" ... using only an Aimpoint Comp M5 and 3x magnifier.
Bookmarks