Barrier Blind Loads
There has been a shift away from fragmenting ammunition and toward barrier-blind/bonded loads. Doctor Roberts' latest take on this: "For LE and other individuals not restricted by the Hague convention, because of their good terminal performance across a wide spectrum of potential engagement scenarios, the bonded barrier blind projectiles have moved ahead of the fragmenting OTM loads we previously recommended, as the best general purpose loads available."
Also: "If you are, then why are you concerned about properly engineered blind to barrier 5.56 mm loads, since ALL of the current effective barrier blind ammunition penetrates NO more than service caliber handgun ammunition in the event of a miss. For that matter, the recommended 7.62 x 51mm loads for 16" rifle use, like the Rem 150 gr Core Locked Ultra Bonded, penetrate the same depth as handgun rounds...
The better bonded loads like TBBC, are definitely MORE effective than the TSX style all copper bullets, as they expand better, retain more mass, and offer a larger surface area, especially through intermediate barriers.
The current generation of LE barrier blind loads like 5.56 mm Federal 62 gr Trophy Bonded Bear Claw (TBBC) bonded JSP (XM556FBIT3) and 5.56 mm Winchester 64 gr solid base bonded JSP (Q3313/RA556B) developed for the FBI, are at 5.56 mm pressures using appropriate crimped & sealed primers, sealed case neck, same trajectory as M855 so it matches many common ACOG BDC's, etc... The new Black Hills 5.56 mm 50 gr TSX loading is another 5.56 mm offering which offers many of these same features--it matches closely with 5.56 mm 55 gr M193 practice ammo..."
To summarize: Fragmenting loads are still fine if you can anticipate unobstructed shots, but even a home owner may have to deal with barriers and could potentially benefit from barrier blind loads. Should you panic and throw out all your heavy OTM stuff? Not at all - you might simply want to keep the above paragraphs in mind.
If using a short-barreled weapon: The same guidelines apply as for barrier penetration loads. SBRs usually have insufficient velocity to achieve fragmentation velocity.
As per Doctor Roberts: "Keep in mind, that with non-fragmenting bullet designs, heavier bullet weights are not necessarily better, especially at closer ranges and from shorter barrels. As long as penetration and upset remain adequate, it is possible to use lighter weight non-fragmenting bullets and still have outstanding terminal performance. With fragmenting designs, a heavier bullet is ideal, as it provides more potential fragments and still allows the central core to have enough mass for adequate penetration. In addition, heavier bullets may have an advantage at longer ranges due to better BC and less wind drift."
Bookmarks