Threads to 3 lug adapter

[Bret]

I recently purchased a 3 lug adapter for my TiRant 9 suppressor and tried it out on my MKE Z5RS. I'm actually pretty blown away at how well it works. I have several other 9mm carbines (RRA, Colt, Tavor, Stribog) that have threaded muzzles that I'd like to change over to use a 3 lug adapter. I do have a couple of questions. What keeps the 3 lug adapter from rotating off just like the suppressor might if it was directly threaded on? Are there any less expensive 3 lug flash hiders or muzzle devices? All that I've seen are well over $100.

[Smokin338]

Rocksett or Loctite

There are a couple of other brands of 3-lugs that cost less then $100, but your going to have to investigate it out. Some work with what you have and some don't... since some make to the HK standard and others don't.

[Hop]

I have a Tros 3 lug HK adapter (https://trosusa.com/). Mark @ Tros recommended Rocksett unless you are wanting to easily remove it. Blue will kind of keep it in place if you don't get it too hot.

[bryanZ06]

I have a 3 lug adapter from ILWT. It locks up nice and tight on my Omega 9k with the internal mount.

https://inleadwetrust.com/product/hk...1-2-28-muzzle/

I used Rocksett when I mounted it and it's GTG.

[MQ105]

Griffin Armament has some 3 lug adapters. I've been running one for several years and 20k+ rounds; so far, so good. Rockset just like any other QD mount.

[Bret]

Thanks for the information guys. I ordered an adapter from inleadwetrust. I'll let y'all know how it does.