G&R Tactical
Results 1 to 8 of 8

Thread: Threads to 3 lug adapter

  1. #1
    Join Date
    Nov 2007
    Posts
    2,021
    Feedback Score
    0

    Threads to 3 lug adapter

    I recently purchased a 3 lug adapter for my TiRant 9 suppressor and tried it out on my MKE Z5RS. I'm actually pretty blown away at how well it works. I have several other 9mm carbines (RRA, Colt, Tavor, Stribog) that have threaded muzzles that I'd like to change over to use a 3 lug adapter. I do have a couple of questions. What keeps the 3 lug adapter from rotating off just like the suppressor might if it was directly threaded on? Are there any less expensive 3 lug flash hiders or muzzle devices? All that I've seen are well over $100.

  2. #2
    Join Date
    Jul 2016
    Location
    Edge of Nowhere
    Posts
    159
    Feedback Score
    3 (100%)
    Rocksett or Loctite

    There are a couple of other brands of 3-lugs that cost less then $100, but your going to have to investigate it out. Some work with what you have and some don't... since some make to the HK standard and others don't.

  3. #3
    Join Date
    Nov 2010
    Location
    Indy
    Posts
    135
    Feedback Score
    0
    I have a Tros 3 lug HK adapter (https://trosusa.com/). Mark @ Tros recommended Rocksett unless you are wanting to easily remove it. Blue will kind of keep it in place if you don't get it too hot.

  4. #4
    Join Date
    Jun 2013
    Posts
    14
    Feedback Score
    0
    I have a 3 lug adapter from ILWT. It locks up nice and tight on my Omega 9k with the internal mount.

    https://inleadwetrust.com/product/hk...1-2-28-muzzle/

    I used Rocksett when I mounted it and it's GTG.

  5. #5
    Join Date
    May 2013
    Posts
    244
    Feedback Score
    8 (100%)
    Griffin Armament has some 3 lug adapters. I've been running one for several years and 20k+ rounds; so far, so good. Rockset just like any other QD mount.

  6. #6
    Join Date
    Nov 2007
    Posts
    2,021
    Feedback Score
    0
    Thanks for the information guys. I ordered an adapter from inleadwetrust. I'll let y'all know how it does.

  7. #7
    Join Date
    Nov 2007
    Posts
    2,021
    Feedback Score
    0
    I installed it on my Rock River Arms 9mm SBR. Looks good so far. I'll get it to my range and see how it does.



  8. #8
    Join Date
    May 2011
    Location
    Va
    Posts
    549
    Feedback Score
    0
    Quote Originally Posted by Hop View Post
    I have a Tros 3 lug HK adapter (https://trosusa.com/). Mark @ Tros recommended Rocksett unless you are wanting to easily remove it. Blue will kind of keep it in place if you don't get it too hot.
    The last adapter I ordered from tros took around 13 months to get. Tros makes good stuff but isn't good about shipping it out.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •