G&R Tactical
Results 1 to 2 of 2

Thread: new barrel

  1. #1
    Join Date
    Dec 2007
    Posts
    2
    Feedback Score
    0

    new barrel

    I'm working on my 1st build and I have a question. I purchased a Wilson 18" S/S barrel. When I received the barrel it came with only 1 dimple in the barrel for the low profile gas block. Is this normal? Do I only need 1 dimple or am I suppose to dimple for the 2nd one myself. Is the 1 dimple there so I can lock the gas block down in place and exactly mark where the 2nd dimple goes? Thanks in advance for any help I can get.

  2. #2
    Join Date
    Nov 2010
    Location
    MI
    Posts
    2,741
    Feedback Score
    20 (100%)
    One dimple is pretty much the norm.

    The set screw spacing on gas blocks varies.

    One dimple allows you to locate the gas block with the rear screw and then secure any other screws.
    Black River Tactical
    BRT OPTIMUM Barrels - 16" MPR, 14.5" MPC, 11.5" CQB, 9" PDW
    BRT OPTIMUM-S Barrel - 11.5" CQB Suppressor Gas Drive
    BRT OPTIMUM-S Barrel - 11.5" SB Suppressor, 11.5" SBT 25 Deg Tapered Shoulder Suppressor
    BRT Covert Comps 7.62, 5.56, 6X, 9mm
    BRT MarkBlue Gas Tubes - BRT EXT, EXC and PDW Lengths
    BRT EZTUNE Gas Tubes - CAR and MID
    BRT MicroPin Gas Blocks - .750" & .625"
    BRT MicroTUNE Adjustable Gas Blocks
    BRT CustomTUNE Gas Ports

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •