Thinking about a Faxon 6.5 Creedmoor barrel? Read on...
I recently purchased a Faxon Big Gunner 6.5 Creedmoor barrel, 16.1" inches, midlength gas.
Installed in my Aero M5 upper and using a Toolcraft dual ejector high pressure BCG, it would not feed any of my 6.5 ammo. I tried with a single ejector bolt, and it fed Sellier & Bellot 140gr ammo with its shorter, more rounded bullet, but still refused to feed VLDs.
Why? Because the feed cone is way too small and bullets simply hit the "wall" -- you can see the copper marks in the second picture:
So I asked my gunsmith to widen the feedcone, which he did. Now the barrel/BCG combo feeds everything perfectly.
Brass is fine, no problems with bulging cases or anything like that. Barrel is also very accurate.
Before I talked to my gunsmith, I contacted Faxon directly and they said the barrel was fine and were no further help.
So, if you're buying a Faxon 6.5 Creedmoor AR308 barrel, be forewarned that you may have feeding problems!
You can look at all sorts of AR308 barrels online and see generous feed cones. I sincerely hope Faxon fixes this issue.
Last edited by caporider; 11-15-19 at 13:58.
Scout Rider for the Mongol Hordes
Bookmarks