Originally Posted by
everready73
Vltor MUR is a great option. Little more expensive but you can find for around $150
I would also look at SOLGW. They undersize the barrel extension slightly for a tight barrel fit (like BCM) which people say helps with accuracy. They also slightly oversize the lugs on the upper so you get a nice tight fit (instead of needing tension screw in lower) with their lower, or most others
BCM also has a new upper out which should be more rigid that a standard milspec. They also undersize for tight barrel fit. If you are on a budget you can also pick up one of their normal blem uppers for under $70. I have bought several and like these
Solid advice right here.
RealeyesRealizeRealLies
BCM 16" RECCE MK2 DkBrz, Custom Mk12 Mod1 built by Monty LeClair, 16" Middy w/ HCS RECCE barrel, A5, Young NM BCG, SSP, Geissele NM rail, Ops Inc., Super CH. 14.5" middy Noveske Afghan X3, 10.3" pistol DD barrell, Benelli M4, Ruger 10/22 w/Victor stock, GLOCK 17 Gen 4, Dan Wesson Valor Duty Coat, Dan Wesson Valor Blue, Dan Wesson Silverback 10mm, S&W 27 4"
B Co 4th502nd Inf Reg. '86-'90. 11b
B Co 3rd187th InfReg. '90-'94. 11b
Iron Rakkasans
Bookmarks