My 6.5 needs 40 moa base with 8X40 screws and otherwise please.
PB
My 6.5 needs 40 moa base with 8X40 screws and otherwise please.
PB
"Air Force / Policeman / Fireman / Man of God / Friend of mine / R.I.P. Steve Lamy"
Who’s rifle?
Sent from my iPhone using Tapatalk
Richard Near does 10, 20, 45, and 75 MOA.
I think Cam Murphy at Murphy Precision does as well.
Isllc, Bergara maybe my MWS
"Air Force / Policeman / Fireman / Man of God / Friend of mine / R.I.P. Steve Lamy"
You can use these if you already have Pic bases, but note: the more elevation you add to the rear, you have to allow for your objective bell clearing and the fact if it isn't high enough your barrel and muzzle (or can-suppressor) will mask your line-of-sight.
I have a Nightforce 40 MOA base on a short 700. I don't know if that footprint matches Bergara. Might have to open the holes a bit for size 8 fasteners.
https://www.egwguns.com/hd-remington...e-mount-40-moa
They still make a long action model if you need long.
NF d/c’ed their 40 MOA #8.
Sent from my iPhone using Tapatalk
Nightforce does make some mounts that take the 40's, not sure if 40mao though. Ill research. Its Remmy action base set up.
Thanks guys
PB
"Air Force / Policeman / Fireman / Man of God / Friend of mine / R.I.P. Steve Lamy"
https://www.midwayusa.com/product/1008998077?pid=286928
You may need to open up the screw holes.
Sent from my iPhone using Tapatalk
Thanks guys. Bought the EDW. Cheap but I don’t think my badger or NF bases work any different than EDW.
PB
"Air Force / Policeman / Fireman / Man of God / Friend of mine / R.I.P. Steve Lamy"
Bookmarks