-
AR15 upper receiver trueing
I'm wanting to send my AR15 upper out to be trued and matched with a 18" barrel that I have.
Who here has done it and who did you send it to?
-
IMO, buy a BCM upper receiver and call it a day.
Nice snug fit of the barrel extension to upper and when mounting my rail (Geissele) barrel is dead nuts on center.
-
I’ve never sent one out. I have used Mega uppers and had to put the barrel in the freezer and heat the upper to get them to fit. I do know either Brownells of Midway has a tool to true the upper receiver face but have never used one.
-
Last edited by rpoL98; 01-27-20 at 16:07.
-
I dont think you need to send it out as you can do the lapping with the Brownells lapping tool if you have a drill. On a decent lower all your looking to do is true up the reciver face which oftentimes does not go past the anodizing. Literally takes 5 min.
If you are looking to send it out, Robb Jensen who is a major contributor here can do that for you and also bed the reciver. Robb's info - https://eliteshootingsports.com/t-armorer.aspx
If you are looking for someone to build the whole upper and also accurize it, Steve at citizen arms works wonders - https://www.citizenarms.com/
-
Thank you, everyone.
I was thinking to send it out because I thought they true and match the upper to the barrel extension.
-
I would contact Retro Arms Works if you want to send it out. he has done a good bit of work for me. Very fast turn around and high quality work
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks