356 TSW Barrel Conversion

[BH321]

So I for over a month now have been trying to find a gunsmith who can ream a 9mm barrel to 356 TSW or offers a 356 TSW conversion barrel for the P320 platform. Briley’s was the original manufacturer of the Glock conversion barrels that were manufactured back in 2020 and having contacted them I have been informed that they are no longer offering this service for any platform. I then tracked down the story of Randy Lee from Apex tactical and his involvement with trying to bring back the round but apparently their barrels were a limited run and they no longer offer that product. Having done that I have since gone down a few other rabbit holes and am still awaiting a response from Barsto but was wondering if any of our esteemed members here might have some leads or recommendations?

[Taguin]

TJ's custom gun works may be able to help you. He modified a similar barrel at accept 9X21 for me.

[gaijin]

Option; contact Dave Manson and see if he has, or can make a reamer. Rechamber barrel yourself.
Curious why you want that chambering, do you have a barrel of .356 TSM Brass?

https://mansonreamers.com/

[GNXII]

IIRC wasn't there a 6906 based gun chambered for this round?

[BH321]

Option; contact Dave Manson and see if he has, or can make a reamer. Rechamber barrel yourself.
Curious why you want that chambering, do you have a barrel of .356 TSM Brass?

https://mansonreamers.com/

I have a Glock 19 chambered in the caliber and yes.