Results 1 to 4 of 4

Thread: Mounting Trijicon Accupower 1-4 to carbine with FSP

  1. #1
    Join Date
    Jan 2015
    Posts
    44
    Feedback Score
    0

    Mounting Trijicon Accupower 1-4 to carbine with FSP

    Would like to mount a Accupower 1-4x to my carbine with a Centurion rail, Colt Socom barrel configuration. Pic below.

    I have a Aero Precision Ultralight 30MM Scope Mount, SPR but I imagine at 1x, the FSP will block my field of view. Is there any way to avoid this with a riser or is that a bad idea?

    Have a very similar configuration to this rifle:

    CM4Upper-4.jpg
    Attached Images Attached Images
    Last edited by FlyPenFly; 05-20-20 at 21:25.

  2. #2
    Join Date
    May 2008
    Posts
    5,286
    Feedback Score
    5 (100%)
    At 1X the FSB will be very blurry. Even with a riser you will probably see it. The trick is to just ignore it and focus on the important things...the reticle and target. We've all pretty much learned to do this. After a while I didn't even notice the FSB.

    I wouldn't use a fixed buis with the Trij. Also the 12 O'clock mounting of the light might be a larger blur than even the FSB. You might want to go to an offset mount for that.
    Last edited by TomMcC; 05-20-20 at 22:08.

  3. #3
    Join Date
    Jun 2018
    Posts
    236
    Feedback Score
    0
    My experience is like TomMcC’s. I think you will tune out the front sight. Or, replace the FSB with a low profile and use offset BUISs.

  4. #4
    Join Date
    Jul 2007
    Posts
    25
    Feedback Score
    0
    Remove FSB and replace with gas block with rail. Mount BUIS. Fold BUIS down. Done.
    Fire in the Hole

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •