Page 2 of 2 FirstFirst 12
Results 11 to 14 of 14

Thread: Which Glock MOS plate do I use for a Trig RMR?

  1. #11
    Join Date
    Mar 2007
    Posts
    960
    Feedback Score
    14 (100%)
    Quote Originally Posted by crossgun View Post
    I have both and really like the Forward Controls. For sure dont expect much out of the Glock plate except for your RMR to shortly go flying of your slide.
    This is 100% correct. I used the MOS plate/screws to attach an RMR to a Glock. I used loctite and a torque wrench. Everything was installed properly. Friend was shooting the pistol when the RMR flew off and cracked him in the forehead. Made a nice little bloody cut.

    I switched to the CHPWS plate and used VC3 threadlocker. This works perfectly and has not moved in 1,500 rounds. Highly recommended
    Last edited by signal4l; 06-29-20 at 10:14.

  2. #12
    Join Date
    Feb 2012
    Location
    Upstate, SC
    Posts
    569
    Feedback Score
    10 (100%)
    As others have said, I'd look no further than C&H Precision or FCD. You can't go wrong with either of them.

  3. #13
    Join Date
    Mar 2016
    Posts
    89
    Feedback Score
    0
    I went with the CHPWS V4 mil, and have been pleased with it so far. Machining looked great and I like the T-turrets as an advancement on the V3 design. Spec says torque to 10 in/lbs, which seems low to me.

    The Forward Controls design looks like what the OEM plate should have been. I really like the forward and rear lugs. This was honestly my first choice, but unavailable.

    I'd pick whichever is in stock, and not look back.

  4. #14
    Join Date
    Mar 2010
    Posts
    85
    Feedback Score
    0
    Quote Originally Posted by IKnowNotEverything View Post
    I went with the CHPWS V4 mil, and have been pleased with it so far. Machining looked great and I like the T-turrets as an advancement on the V3 design. Spec says torque to 10 in/lbs, which seems low to me.
    That's typical for the small screws they're using.

    Same spec for the Agency AOS plates.

Page 2 of 2 FirstFirst 12

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •