Results 1 to 9 of 9

Thread: Gas to face suppressed QC10

  1. #1
    Join Date
    Dec 2008
    Location
    Alabama
    Posts
    113
    Feedback Score
    18 (100%)

    Gas to face suppressed QC10

    I have a Glock 9mm QC10 upper receiver, QC10 bolt, QC10 5.5" barrel and QC10 charging handle. The lower is also QC10, CMC trigger, BCM buffer tube, 308 carbine spring and Blitzkrieg hydraulic buffer. I have done the RTV mod to the rear of the charging handle to help seal that area. Often when I shoot suppressed, I get noticeable gas to the face. If a breeze is blowing, it doesn't bother me. I have researched and don't see other folks complaining about this with the 9mm.

    I figured the QC10 charging handle would have any special treatment if it was needed. Are there any charging handles that might help reduce gas to face for 9mm?

    Any other ideas?


  2. #2
    Join Date
    Jul 2016
    Location
    Edge of Nowhere
    Posts
    195
    Feedback Score
    3 (100%)
    Due to the nature of the blow back design... it's just something we have to live with. Some people have used these with o.k. feedback, but for the price... it's a hmmm. https://www.precisionreflex.com/Detail.aspx?PROD=186694

  3. #3
    Join Date
    Dec 2008
    Location
    Alabama
    Posts
    113
    Feedback Score
    18 (100%)
    Quote Originally Posted by Smokin338 View Post
    Due to the nature of the blow back design... it's just something we have to live with. Some people have used these with o.k. feedback, but for the price... it's a hmmm. https://www.precisionreflex.com/Detail.aspx?PROD=186694
    Thanks for the info. I'll do a bit of research and find out how it works.

  4. #4
    Join Date
    Nov 2010
    Location
    MI
    Posts
    3,516
    Feedback Score
    22 (100%)
    Which suppressor?
    Black River Tactical
    BRT OPTIMUM Hammer Forged Chrome Lined Barrels - 11.5", 12.5", 14.5", 16"
    BRT EZTUNE Preset Gas Tubes - PISTOL, CAR, MID, RIFLE
    BRT Bolt Carrier Groups M4A1, M16 CHROME
    BRT Covert Comps 5.56, 6X, 7.62

  5. #5
    Join Date
    Jan 2014
    Posts
    380
    Feedback Score
    0
    What handguard is that?

  6. #6
    Join Date
    Aug 2009
    Posts
    4,383
    Feedback Score
    16 (100%)
    One benefit of using a 45 suppressor on a 9MM AR SBR.

  7. #7
    Join Date
    Dec 2008
    Location
    Alabama
    Posts
    113
    Feedback Score
    18 (100%)
    Quote Originally Posted by Clint View Post
    Which suppressor?
    Rugged Obsidian9. Shown in long config pictured above.

  8. #8
    Join Date
    Dec 2008
    Location
    Alabama
    Posts
    113
    Feedback Score
    18 (100%)
    Quote Originally Posted by fedupflyer View Post
    What handguard is that?
    9.5" Odin Works.

  9. #9
    Join Date
    Dec 2008
    Location
    Alabama
    Posts
    113
    Feedback Score
    18 (100%)
    Quote Originally Posted by RHINOWSO View Post
    One benefit of using a 45 suppressor on a 9MM AR SBR.
    LOL, I considered the Obsidian45 and I suspect it would be a little bit less gassy but it's bigger, heavier and louder than the 9. I only own one 45, it's a 1911 and I would never swap the barrel on that gun.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •