Results 1 to 5 of 5

Thread: Replacing a Dillon Trimmer with a Giraud

  1. #1
    Join Date
    Jun 2006
    Location
    Southern Indiana
    Posts
    1,887
    Feedback Score
    13 (100%)

    Replacing a Dillon Trimmer with a Giraud

    Has anyone here replaced a Dillon trimmer with a Giraud? What didn't you like about the Dillon? Did the Giraud make up for the Dillon's faults? Any regrets about making the change? Would you do it again?
    "The very purpose of a Bill of Rights was to withdraw certain subjects from the vicissitudes of political controversy, to place them beyond the reach of majorities and officials and to establish them as legal principles to be applied by the courts." Justice Robert Jackson, WV St. Board of Education v. Barnette, 319 U.S. 624 (1943)

    "I don’t care how many pull ups and sit ups you can do. I care that you can move yourself across the ground with a fighting load and engage the enemy." Max Velocity

  2. #2
    Join Date
    Jul 2008
    Posts
    210
    Feedback Score
    0
    I have both and use my Dillon trimmer more. I like the RT1500 with a 1050 to crank out processed brass quickly. I tend to use the Giraud for smaller batches where I don't mind handling each piece of brass. There's no way I would give up the Dillon Trimmer for a Giraud simply based on pure volume of brass that I can process. If you're reloading precision ammo then the Giraud might be a better choice.

    Sent from my SM-G965U using Tapatalk

  3. #3
    Join Date
    Jan 2013
    Location
    Black Hills, South Dakota
    Posts
    3,131
    Feedback Score
    0
    Not much out there can beat an RT1500 on a well adjusted size/trim die. Especially on a progressive press with a case feeder, and enough tool head space to do all the steps for prepped brass.

    If a guy is doing small batches just use a manual case trimming lathe and prep tools. If you need to do volume RT1500 is the answer.

  4. #4
    Join Date
    Mar 2008
    Posts
    1,717
    Feedback Score
    7 (100%)
    I prefer the Giraud because it champers and you can trim after removing case lube.
    “The Trump Doctrine is ‘We’re America, Bitch.’ That’s the Trump Doctrine.”

    "He is free to evade reality, he is free to unfocus his mind and stumble blindly down any road he pleases, but not free to avoid the abyss he refuses to see."

  5. #5
    Join Date
    Sep 2007
    Location
    AZ
    Posts
    27,072
    Feedback Score
    14 (100%)
    Quote Originally Posted by Coal Dragger View Post
    If you need to do volume RT1500 is the answer.
    I've never tried the Dillon system. But with my wet tumblers doing about 125-150 pieces at a crack, I just trim in those batch sized with the giraud.

    The thing I like about that process (as well a mack's point about post lube removed trimming), is that you can also sort by head stamp (if you wish to) when trimming.

    I don't like to sort, but some brass flavors are simply different in weight. I just set up 2 or 3 trays and split off the brass after trimming. I then use the less desireable brass for blaster type ammo.
    "You people have too much time on your hands." - scottryan

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •