I've got one of those, it's a knock off of this one:
https://geissele.com/reaction-block-...tube-only.html
I find it useful for a lot of tasks, torquing the castle nut hasn't been one of them.
I've got one of those, it's a knock off of this one:
https://geissele.com/reaction-block-...tube-only.html
I find it useful for a lot of tasks, torquing the castle nut hasn't been one of them.
Patriotism means to stand by the country. It does not mean to stand by the President... - Theodore Roosevelt, Lincoln and Free Speech, Metropolitan Magazine, Volume 47, Number 6, May 1918.
Every Communist must grasp the truth. Political power grows out of the barrel of a gun. Our principle is that the Party commands the gun, and the gun must never be allowed to command the Party Mao Zedong, 6 November, 1938 - speech to the Communist Patry of China's sixth Central Committee
When you torque place a stock on the RE and put pressure on it to the right (counter clockwise) while torquing. This will prevent clockwise rotation. 90% of end plates indexing pins allow about 5 degrees or sometimes more of play even when indexed in the slot.
At the end of the day, its not a huge deal but if you run stocks with large cheekweld surfaces, it feels weird.
"your AR is shit, change my mind" - Will Larson
I make work horses, not show ponies.
Have your bud that did it fix it for ya
I love the geissele stuff and have both of the above tools. Back when the reaction block was only $80 so not sure wtf the happened there. The Midwest reaction block is a better design though imo.
Neither facilitate ensuring the RE is lined up however so have to eye ball it or rig up a clamp that holds both the lower and RE in line vertically.
Dwilson was working on a attachment that would function similar clamping the lower and the reaction block inline but I don’t think it ever made it production unfortunately.
Sent from my iPhone using Tapatalk
Not for REs huh?
https://youtu.be/3J4hZO9ZaDA
I posted a cheaper knockoff of the G$ Reaction block since they upped the price by $100. $100 seems reasonable doubling the price to $200 not so much.
Simple fix clamp the magwell vise block in the vise with two pieces of angle iron to make the jaws longer while also clamping the RE vise. Both are then held perfectly on plane. May have to shim to get the RE block to lock up tight but that would be fairly easy to do with a few pieces of flat iron.
No doubt that would work but it does seem like the juice isn't worth the squeeze. Lots of dollars tied up in that video.
"The peace we have within us is most often expressed in how we treat others"
Bookmarks