Page 4 of 4 FirstFirst ... 234
Results 31 to 38 of 38

Thread: Disappointing outcome - first time out with .308 build

  1. #31
    Join Date
    Jan 2013
    Posts
    2,343
    Feedback Score
    38 (100%)
    Quote Originally Posted by 1168 View Post
    Carrier key screws?

    I only personally know of one rifle where a gas port on a reputable barrel truly had to be opened (and wasn’t made that way on purpose). It was a .224 Valk using a high-end barrel. Short stroked, so the owner dumped the weights out of the (rifle length) buffer, and it cycled. Barrel maker warrantied it and opened the port.
    I know of many including 3 from this manufacturer.

  2. #32
    Join Date
    Jun 2015
    Location
    Atlanta area
    Posts
    738
    Feedback Score
    2 (100%)
    I'm finding it difficult to reconcile the rifle locking back on empty (indicating sufficient gas drive) and needing the gas port opened up. Your problem may be magazine or ammo related.
    Last edited by georgeib; 04-07-21 at 05:14.

  3. #33
    Join Date
    Oct 2012
    Location
    Minnesota
    Posts
    168
    Feedback Score
    0
    Quote Originally Posted by georgeib View Post
    I'm finding it difficult to reconcile the rifle locking back on empty (indicating sufficient gas drive) and needing the gas port opened up. Your problem may be magazine or ammo related.
    George it locks back on an empty mag using the charging handle, it will not lock back on an empty mag when fired
    "shall not be infringed"

  4. #34
    Join Date
    Jun 2015
    Location
    Atlanta area
    Posts
    738
    Feedback Score
    2 (100%)
    Quote Originally Posted by Black_Sheep View Post
    George it locks back on an empty mag using the charging handle, it will not lock back on an empty mag when fired
    Ahh. Got it now.

    Still inclined to think that the gas port size is sufficient. Mine has a 0.080 on a mid-length 18" barrel, and I had to use an adjustable gas block almost completely closed to tame the over gassing. Even with cheaper brass cased ammo. Is there someone you can borrow a BCG from to test?

  5. #35
    Join Date
    Nov 2010
    Location
    MI
    Posts
    3,105
    Feedback Score
    22 (100%)
    Interesting everybody thinks 075 intermediate 308 is perfectly fine.

    It's certainly possible the NiB BCG is the issue.

    The gas key diameter and bolt tail seal diameter should be checked.

    Also, the BCG could be swapped for a known good unit.
    Black River Tactical
    BRT OPTIMUM HFCL Barrels - Hammer Forged Chrome Lined 11.5", 12.5", 14.5"
    BRT OPTIMUM Barrels - 16" MPR, 14.5" MPC, 12.5" MRC, 11.5" CQB, 9" PDW
    BRT EZTUNE Preset Gas Tubes - CAR and MID
    BRT Covert Comps 7.62, 5.56, 6X, 9mm
    BRT Bolt Carrier Groups M4A1, M4A1 PLUS

  6. #36
    Join Date
    Oct 2012
    Location
    Minnesota
    Posts
    168
    Feedback Score
    0
    Quote Originally Posted by Clint View Post
    Interesting everybody thinks 075 intermediate 308 is perfectly fine.

    It's certainly possible the NiB BCG is the issue.

    The gas key diameter and bolt tail seal diameter should be checked.

    Also, the BCG could be swapped for a known good unit.
    No access to another BCG but I can certainly measure the gas key and bolt tail seal diameters with a dial caliper. What kind of clearance would be considered acceptable?
    "shall not be infringed"

  7. #37
    Join Date
    Nov 2010
    Location
    MI
    Posts
    3,105
    Feedback Score
    22 (100%)
    Dial calipers are not sufficient.

    Pin gauges are required for accurate ID measurement.

    Quote Originally Posted by Black_Sheep View Post
    No access to another BCG but I can certainly measure the gas key and bolt tail seal diameters with a dial caliper. What kind of clearance would be considered acceptable?
    Black River Tactical
    BRT OPTIMUM HFCL Barrels - Hammer Forged Chrome Lined 11.5", 12.5", 14.5"
    BRT OPTIMUM Barrels - 16" MPR, 14.5" MPC, 12.5" MRC, 11.5" CQB, 9" PDW
    BRT EZTUNE Preset Gas Tubes - CAR and MID
    BRT Covert Comps 7.62, 5.56, 6X, 9mm
    BRT Bolt Carrier Groups M4A1, M4A1 PLUS

  8. #38
    Join Date
    Nov 2010
    Location
    MI
    Posts
    3,105
    Feedback Score
    22 (100%)
    Double tap
    Black River Tactical
    BRT OPTIMUM HFCL Barrels - Hammer Forged Chrome Lined 11.5", 12.5", 14.5"
    BRT OPTIMUM Barrels - 16" MPR, 14.5" MPC, 12.5" MRC, 11.5" CQB, 9" PDW
    BRT EZTUNE Preset Gas Tubes - CAR and MID
    BRT Covert Comps 7.62, 5.56, 6X, 9mm
    BRT Bolt Carrier Groups M4A1, M4A1 PLUS

Page 4 of 4 FirstFirst ... 234

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •