I have a Colt milspec (3 position) safety from a SOPMOD kit, and I'm wondering if I will be able to use it with a semi auto trigger group, or if it will cause some unforeseen mechanical issues.
I have a Colt milspec (3 position) safety from a SOPMOD kit, and I'm wondering if I will be able to use it with a semi auto trigger group, or if it will cause some unforeseen mechanical issues.
It will work but the safety will continue past the normal fire position on a semi rifle.
Nope.
On semi it will fire.
Flipped 180 to where "AUTO" would normally be it'll fire in semiautomatic mode. Unless you have shitty disconnector timing there is no full-auto sear to release the hammer once the bolt is locked.
Olympic Arms sold metric ass-loads of AR rifles and carbines with GI selectors in the 80s and early 90s that would go past 90-degrees. New-old stock selectors eventually dried up as the assault rifle ban kicked-in in 1994.
Should not be an issue.
PB
Bookmarks